Towercrane sections are the backbone of the crane's safety at height, which are responsible for bearing compressive loads and torsional moments in harsh workshop conditions. By offering a wide range of steel sections (including 2-meter, 3-meter, and 5-meter sections), Diyar Tower Crane has provided the possibility of accurately matching the crane structure with the load capacity and height of your project. Choosing the right section based on the main brand of the crane, the type of pin or screw, and the analysis of the construction material is the only way to prevent structural fatigue in long-term projects.
The importance of choosing the type of section based on the height and load of the project
Many contractors only pay attention to the external dimensions when purchasing a section, but in practice, the structural differences in the geometry of the trusses greatly affect the performance of the crane at heights above 100 meters. The sections that we offer in Diyar Tower Crane are produced according to strict metallurgical standards to have the least amount of deformation against dynamic loads and strong winds in the region. The use of high-grade alloys in the production of these sections ensures the longevity of the connections in projects that have a high work cycle.
Versatility of sections with different market brands
The main challenge in providing tower crane parts is the complete mismatch of different structures with main brands such as Potain, Liebherr or Zoomlion. At Diyar Tower Crane, using reverse engineering and detailed technical drawings, we have produced sections that exactly match the fabric structures at the joints (including the places of screws and pins). This accuracy in production means that during assembly, there is no need for heat treatment or unsafe drilling in the workshop, which is one of the biggest risks during tower crane installation.
Technical Review: Pin-Mother vs. Bolted Sections
In choosing between pin-base and screw-type sections, the priority is the speed of assembly and the type of use of the crane. Due to the high speed of installation and opening, the pin mother sections are an ideal option for projects where the crane needs to increase the height quickly and frequently. On the contrary, bolt-connected systems provide more structural stability in projects with a very long duration. According to our technical investigations in industrial projects, screw systems with grade 10.9 and above are less prone to loosening due to intermittent vibrations of the tower crane.
Safety standards and maintenance of sections during work
The tower crane section is not a lifetime part and requires periodic inspections. Rust in weld lines or deformation in studs can lead to disaster. We advise our customers to have the purchased sections checked periodically by weld testing and thickness measurement experts. In Diyar Tower Crane, all the sections are covered with furnace colors or hot galvanized, which maximizes the resistance of the structure against moisture and corrosion in northern cities or Sharjah regions of southern Iran.
The challenges of providing raw materials and the quality of domestic production
Today's market is facing a shortage of standard raw materials for the production of high-quality parts. Fluctuations in the quality of steel in the market have caused many manufacturers of sub-stairs to use low-quality alloys that look similar to the main sections, but buckle under the maximum load pressure (Max Load). Our focus at Diyar Tower Crane is on using heavy profiles with ST52 standard, which guarantees high tensile strength. Although this approach slightly increases the cost of production, in the long run it eliminates the risk of the crane falling and the costs of major repairs for the project.
Comparative technical specifications of sections
Section type | Connection system | Main application | Speed Installation | Vibration resistance |
Mother pin section (standard) | Pin and Spill | Quick and short-term projects | Very high | Medium |
Bolted section (heavy) | Pitch Grade 10.9 | High-rise projects | Medium | Very high |
Customizer section | Composite | Compatibility with specific structures | Bottom | top |


