Getting to know the types of wall packages Compare packages

Efficiency and optimal consumption of all kinds of packages have made these systems replace engine houses. A lot of variety in the packages has caused people to get confused at the time of purchase. With the expansion of the gas supply network in different parts of the country, the use of packages has become very common and has many fans. In addition to heating your building, these devices provide you with hot water. There are different types of packages, each of which provides services to the user based on their features.

Check the types of packages

In order to know the types of packages, you must first know what a package is? In answer to this question, it can be said that the packages are systems that have the ability to supply cold and hot water for wall and ground residential units. These systems are classified based on various factors, which we will examine further.

Types of packages based on the installation location

Wall package

Wall packages are a type of packages that have a small size and a beautiful appearance, which are often installed in kitchens, and for this reason, they have many fans. Because these systems do not have a hot water storage source, they are not able to heat the heating system and provide hot water at the same time, and in its design, priority is given to heating water.

As soon as the water tap is opened, all the power of this system is used to heat the water, and if the water tap is open for a long time, the radiator gets cold. All types of wall packages are equipped with a chimney system, where the smoke from combustion is directed outside either through the chimney or through the package fan.

Ground package

Among other types of packages, we can mention ground packages, which are mostly installed in high-rise buildings. The high power of these devices is not suitable for apartment units and small villa units. Due to having a water storage tank, ground packages produce hot water for a short period of time in the event of a power outage. In the past, ground packages were also produced in low power, but with the introduction of wall packages, low power types are no longer useful. For houses that have one bathroom, land packages are more suitable.

Because these packages have an additional tank for storing water. Among the disadvantages of the ground package, we can mention its high noise and that is why in small units, they install it on the terrace. These systems are centrally installed underground or in parking lots and are equipped with a vent for fresh air.

Comparing wall packages with ground packages, it can be said that ground packages have higher capacity and more power in terms of providing hot water and heating. Land packages, which are different types of packages, are used in multi-storied buildings and villas.

Standing ground package

Standing land package is one of the types of land packages that are used for large buildings and villas as well as duplex and two-story buildings. These types of packages are a combination of wall and ground packages. High thermal power with two separate outputs for two heating systems and the ability to separate circuit temperatures are among the characteristics of these devices.

For example, in a large building where a radiator is installed in one part and a floor heating system is installed in another part, and since the temperature required for these systems is different, this system can be installed in such a place. and provide the temperature of both circuits.

Types of packages based on combustion system and torch

Ground package with torch

One of the types of ground package based on ignition system is the ground package with torch. These types of packages are equipped with a linear burner and a direct heat exchanger. Do not be mistaken! Flared systems do not have a boiler, but can use a plate or tank exchanger.

Ground package without torch

Among other types of ground package based on ignition system, we can mention the ground package without torch. These packages have a higher capacity than packages with burners and are equipped with a steel or cast iron pot. One of the advantages of this type of package is the use of diesel, gas or dual burners. Being equipped with a boiler, this system provides its power to provide heating and hot water for larger spaces.

Types of Package Based on Pollution and Output

fan package

Among other types of packages, we can mention the package with a chimney or fan. This package is one of the categories of packages based on the output of pollutants. The package that has a fan brings the air needed for fuel from the outside to the device through a double-walled chimney and also transfers the gases from the fuel to the outside. This is why fan devices can be very useful and effective in keeping the air in the house clean. Among the common packages in the market, its fan type is in accordance with global standards and has been approved.

In addition to home heating, this device also provides instant hot water. In addition, this device can be combined with an air conditioner in order to save energy and provide optimal heating. The fan heating package, which has an aeration fan in the exhaust section of the combustion gases of the package, is used in situations where the package is installed in an open space (such as a balcony and patio) or part of the package chimney path is horizontal (more than 30 cm). .

For this reason, the fan wall package is equipped with a special double-walled chimney, the inner wall of which has a diameter of 6 cm, and the smoke of the device is discharged to the outside environment through this pipe, and the diameter of the outer wall is 10 cm. For this reason, one of the important points in observing the safety of the device is to use a chimney when installing the wall package to remove the smoke caused by the operation of the device and create the required air consumption of the device.

Fan -free package

Another type of package based on the pollutant output system is the fanless packages. Fanless packages are less popular because they get the air needed for fuel from inside the house and do not have a flue to remove the smoke and pollutants from the fuel. Therefore, the package without fan is less used due to the lack of this feature and the lack of free space in the apartment, and its production is also very low.

Types of Package Based on the type of heat exchanger

Single converter package

In the classification of packages based on the heating system, packages with a single converter can be mentioned. Packages with one exchanger are packages that use only one exchanger to provide hot water for heating and hot water used in building units. In this package model, a converter is used to supply hot water for consumption and hot water for heating. These packages have a tank and all water heating operations are done by the same tank.

Two -converter package

The two-converter package is also one of the other types of packages. In this package model, two separate converters are used to provide hot water for heating and hot water for consumption, each of which operates independently of the other. The package with two converters has many advantages, including providing the required hot water with the same temperature and less precipitation. The two-converter heating package is used in situations where either the incoming water has high hardness (solutes) or the apartment floor is more than 120 meters.

Types of packages based on summer and winter performance

Packages are divided into two winter and summer categories in terms of performance. In the summer season, when the heating devices are not used, the package only works to supply the health spa. But in the cold seasons of the year, in addition to supplying hot water, the package must also supply radiator water and heating circuits. In the summer season, the only task of the package is to provide hot water for consumption and various packages based on the type of sanitary fuel.