Performance of impact press machine

The way the impact press works is in the following two ways:

How to Working the Impact Presses:

In the impact press, there is a metal hammer that pushes vertically from the upper metal side to the lower metal side, and this causes the metals to be shaped. By hitting the upper part of the device, its lower part is connected to the riser of the impact press, and the lower metal is connected to the fixed mold of the lower metal, this device provides the energy required by the devices in two hydraulic and dynamic modes. p>

How to Work Mechanically: Mechanically:

In this model of impact presses, the energy in the running wheels is transferred to the crankshaft by means of a clutch. If the clutch is free, it is stopped by the brake in the impact press section of the piston. You can change the opening of the impact press by adjusting the course of this type of impact press.

The components of the double-action impact press include pistons that are placed above and below each other, and in the three-action models, the components of the impact press are two pistons at the bottom and one piston at the top, which are in the directions They move against each other and it requires more precision to perform a press work with it.

Determine Speed in hit Presss

Impact presses have high speed and low load, their load is between 15 and 30 tons and their speed is 1800 courses per minute. During the work, the molds have a speed of about 40 to 800 courses per minute, and for stretching and shaping, the speeds of the press molds should be low enough to allow enough time for the metal to flow. The speed of the impact press is determined according to the dimensions of the machine and the difficulty of the work and is between 5 and 100 courses per minute.

Press Press Sources

In general, impact press components provide their desired force by 4 sources, each of these sources differ from each other according to the amount of work they do and the type of device they have, and include 4 Different types of presses are based on energy supply sources, which are:

Manual presses: This device is powered by the hand and with the help of the operator and works with the operator's power and hand pressure.

Mechanical presses: This device works by means of an electric motor and belt wheel and transfers its power to a rolling wheel and crank axis, and then it will move the striker.

Hydraulic presses: It works by means of oil and water pressure and compresses water or oil and moves the arm of the machine and performs operations.

< b> Pneumatic presses: It gets its power through compressed and dense air.

Maintenance

In order to maintain the impact press components, you should pay attention to the important points to increase the life of the device. These points are:

Be sure to lubricate it before you work with the machine.

Clean any problems that happened on the device so that you can understand the bug.

If you have an abnormal voice, let the device responsible.

If you work with the machine for a long time, be sure to lubricate it.