Ingots are angular granules that form after the impurities on the metal are cooled. To put it more simply, when minerals are placed in the furnace with the purpose of melting, impurities are seen on the molten metals that have a floating state. they take upon themselves; The same angular granules that do not have regular granulations and are used as abrasives. In general, these products can be placed in specific categories that include the following:
Slag, copper powder or slag is the name chosen for it at the time of production and is used in different sectors. As it was mentioned, this product was placed in the above categories according to different technical specifications, of course, each group has different specifications, advantages and prices and are used in different sectors.
Familiarity
Sandblasting is a practical method for decontamination and rust removal of various metal and non-metal surfaces, which will be done using a special device. To perform sandblasting in the best possible way, strong abrasives such as silica sand, garnet, sandblasting, etc. are needed. takes Sandblasted sandblasting has a very high density and has significant hardness, and this is the reason for increasing its wear rate. The covering power of this abrasive is very high and the worn surfaces will be smooth and polished easily.
Specifications are documentary
Slag, which is known by different names of slag grit, copper powder, copper slag, etc., has different technical specifications. As mentioned, this material is a by-product produced from the copper mining process and has high hardness and density. In addition to high density, you should know that this product also has special technical characteristics that have caused in cases be used differently. The presence of a very small percentage of silica in the production of this product minimizes possible risks that threaten human life. Also, due to the very high speed of production and its powder state, it provides you with a smooth and clean surface during use. The top of this product. The producer of these materials uses various methods to prepare and manufacture them; For this reason, you can see different examples of this product in the market. In general, the technical specifications of the sandblast machine are as follows:
In general, the technical specifications of these materials have proven that this product is the best choice for removing deposits, rust and pollution, which can be used to prepare different surfaces for painting in the best possible way. With the help of the desired product, sandblasting can be done to remove impurities and clean metals well.
Types of Barry
Matt Masbarah
Shiny Masbarah
One of the most important extracted copper products is Matt Masbarah; An extremely practical product that has a significant effect on increasing the speed of surface cleaning. In front of it, there is a shiny torch that you can buy at a reasonable price; Of course, this product is less hard than its matte type. Both types of this product have clear differences, the most important of which is the price of these products. Matt masbara has a higher price compared to its shiny type because, unlike glossy masbara, which cools down when it comes into contact with water, matte masbara is reusable. This product has a very high hardness and is also used to repair tanks.
What is the difference between the glossy and glossy men?
According to the mentioned features, it is better to know that these two materials are different from each other in many ways. The color, hardness, density, shape and number of times this material is used are completely different. The abrasion power of matte masbara is much higher than shiny masbara and you can use this material many times. This feature will reduce wear and tear costs.
