The water pump of a horse
The one-horse water pump is one of the most common and widely used domestic water pumps, which is used for various purposes, especially for domestic purposes, along with the half-horse water pump. This type of water pump is usually found in the market in two types: a plate horse water pump or a jet horse water pump. The application of each of these pumps is different and is chosen depending on the place where the pump should be used. This type of home pump can be used for three- to four-story buildings with an area of about 70 meters. We suggest you read the article on the best water pump for a horse.
Plate water pump
A plate water pump with the ability to throw high water can raise water on the surface. Plate water pump is the most common type of water pump in high-rise buildings. This type of water pump, which is also used in agriculture due to its function, has less water suction power compared to the jet type and is more suitable for domestic use. Because in most cases, water in homes reaches the pump through a source or surface pipes.
Jet water pump
Jet water pump is mostly used in cases where there is a need to suck water from deep. This pump with very high suction power can pull water up from the lower parts. For this reason, a jet water pump is used to pump water from the depth of the well. Of course, this pump has special household uses that are getting more attention day by day. One-horse jet water pump can be used for one- to four-story buildings.
Centrifuge water pump
Centrifugal pump with a simple and practical structure is used in different conditions. Centrifugal water pump is used for things like circulator pump and permanent water supply system. This pump is in the dynamic water pump category and is used for various purposes. Today, in every building that uses a heating house or package, there is at least one type of centrifugal water pump. Naturally, a smaller pump is placed in the packages, which do not differ much in terms of performance from the models used in the engine room. In fact, the use of this type of pump is to continuously circulate water in heating systems.
Water pump with expansion tank or pressure source
Water pump with expansion tank or water pump with pressure source, generally one horse pumps are called which are used to strengthen the pressure power and also measure the amount of pressure in the water supply system inside the pipes. In order for the pressure in the pipes not to be too high to damage the piping system, it is necessary to turn off the pump at times. This should be done automatically without manual intervention. One of the things that the expansion tank or pressurized source in home water pumps do is actually inform the pump that it should be turned off or on, which happens through the pressure inside the source and the pressure switch.
Home pump with automatic key
In some cases, you will need a home water pump with an automatic switch so that the water pump should be turned on and off on time. Two types of automatic switches are placed on the domestic water pump. Pressure switch and control set. In the pressure model of the switch, which is used for sources under pressure, the performance is such that the amount of pressure applied to the switch is decisive and it is used for high-volume applications. In the control set model, the performance of the device Coordinates with the flow of water. Because the flow of water in this type of switch is considered as the main function, it is not possible to use high-pressure water flow in the control set, and there is a possibility of burning the switch as soon as it is exposed to high flow. For this reason, this type of key is used for single-unit or one-story buildings.
