Other parts of the building valves
🔰 Sensor
With the increasing development of technology, while most water taps are opened and closed with a lever, there are valves that do not need to be opened and closed by a lever. and are equipped with high sensitivity sensors. In fact, it is enough to put your hand in front of the sensor to open the water, and when you remove your hand from the eye of the sensor, the water is closed. In this case, the lever is used only to heat or cool the water. The sensor is present in some faucets by default, and others have the possibility of installing a sensor. These types of faucets are very suitable for preventing water wastage and hygiene, but in terms of price, sensors can increase the price of the faucet.
🔰 Button
For some construction faucets, a button can be added to adjust the water flow.
🔰 parts to create a rotating mode
You can make a faucet whose neck rotates 180 degrees or even 360 degrees. These types of faucets help you easily wash all kinds of dishes, food, and the sink.
What do you know about the sex of the valves?
In general, faucets are made of two primary materials: rice and dry lead. The use of lead faucets brings problems, among these problems, it can be mentioned that this metal is harmful to human health, and lead metal corrodes very soon due to contact with water, for this reason, the entry of lead ions into the water It can cause serious risks to human health. According to what was mentioned, naturally, lead faucets are cheaper than other faucets, but their durability is less and they quickly rot and corrode. Of course, remember that there is a small amount of lead metal in all faucets, but you must pay attention to the percentage of lead used in the faucets. This kind of information can usually be provided to you by the seller; But in general and outside the discussion of raw materials, faucets can be found in various materials such as stainless steel, brass, cast iron, steel, copper and brass.
types of valves in terms of gender
Brass faucets
This type of faucet is made of brass, and if you live in an area where the water is very hard, it is better to use this type of faucet. use, because hard water solutions (such as calcium carbonate) will not precipitate on brass metal. Also, faucets made of this material do not rust easily and have a long shelf life, on the other hand, this type of faucet has a high price, but in the end, it must be said that buying such a product is worth paying a high price.
As its name suggests, this type of faucet is made of stainless steel. Faucets made of this material are suitable for all types of modern sinks that you can find in the market. These types of valves need care and maintenance because if they are not maintained properly, they are prone to corrosion. Remember that this type of valves should be kept completely free of scratches. In fact, this solution can be applied to prevent corrosion.
This type of faucets are made of bronze and have a completely classic design. Compared to copper valves, these types of valves do not need much polishing. Also, due to the use of bronze metal, it is considered a luxury item and is very expensive.