What is Wind Box Tool?
The air box is one of the most useful and useful tools when working with screws and nuts. Almost in the tool box of all mechanics and technicians, you can find the air box. These tools minimized the pain and difficulty of messing with bolts and nuts, and this made them very popular. But the question that exists is what is a box body and what is its function. In this article, from Bakhtiari's Bakhtiari tool store in Tehran, join us to provide you with complete information about Bakhtiari tools.
How does a wind box work?
The air wrench actually works through a powerful force generated by its high torque. In order to benefit from the sufficient power you need, you can adjust the torque of the device as desired to prevent damage and cutting of screws and nuts. Maybe there are different models in the market to buy, but the way all the box bodies work is the same.
Different parts of the wind box
Air compressor: The air flow required by the device is usually supplied through an air compressor. In the base of the device, two holes are usually installed for the passage of air to ensure sufficient power of the device. The rotation of the router blades is guided. Then, with this work, the rotors of the air wrench drive also rotate. All these processes are done so that the rotor of the air box motor is set in motion so that it can provide the torque and speed required by the user.
Air box hammer: The edge of the router cylinder has a tab. This tab helps the body of the air box hammer to rotate with the movement of the machine's motor. Turning the hammer allows you to easily open or close any screw or nut. By moving the handle of the wrench forward and backward, the hammer moves continuously outward and inward.
What are the steps of using wind box?
1. Assembling the wrench: The first step to use the air box is to connect its different parts to each other. In terms of appearance, there are many similarities between drills and pneumatic wrenches. An air wrench uses a button to release torque and air pressure. First, you need to connect the plastic hose of the air compressor to the end of the air box.
2. Testing the air box: After you have connected all the required parts of the air wrench, you must make sure that it works correctly. Set the compressor pressure between 90 and 100 PSI and check if your air box is providing the required pressure or not. Prevent the compressor hose from twisting so that the air can be transferred without any problems.
Setting the speed: Usually, the speed can be adjusted in the air boxes. Adjust the speed of the machine according to your project to avoid corrosion and cut screws. Also, set the torque at the same time as the speed. After doing this, it is time to place the appropriate socket on the air box. Then put a rubber nut on the pneumatic wrench and press the device button. This allows you to be sure of the correct size of the socket and the correct speed and torque before starting work.