Important Tips on Buying Boxing
If you have ever had a flat tire, you must have seen that the repairman uses an interesting device to loosen the bolts of the car wheels. This device, which also has a special sound, is the same as the air box. In fact, the air box is a widely used tool for opening bolts and nuts, which opens by making successive blows to the left and right at high speed and creating the right torque and power. makes or closes bolts and nuts. This device, which is placed in the category of pneumatic or air tools, works by using wind energy and compressed air, which is supplied through a compressor.
What are the points to be careful about buying wind boxing?
Whether you are a technical person or not, you must be aware that without tools, many of our daily activities will not be done. In the meantime, wrenches and all kinds of boxes also play an important role and are used in almost all mechanical works, apparatus, etc. Follow us to check the important points in buying an inflatable box:
⚒ Size of Boxing Boxing
The first thing to consider when buying a box body is to pay attention to the size of the box body drive. The drive means the tip of the box output shaft or the box ratchet wrench, which is connected to the end of the box series and has a 4-sided appearance.
Air box drive can have different sizes. From the smallest size, which is a quarter of an inch, to the sizes of three eighths of an inch, one half, one inch and above. Now it is you who should choose the right size of the drive according to the type of work and your task. Otherwise, you will have to pay separate costs to buy a box conversion or a box wrench set. Also keep in mind that the bigger the drive, the bigger the wrenches. Usually, half an inch drive is the most used in common tasks such as changing oil and tires.
⚒ Inflatable buckex shaft
The air box shaft is actually an interface between the box series and the torque generating motor, the longer it is, the more suitable it is to access limited and tight spots. For this reason, it is necessary to pay attention to the size of the shaft before buying an air box.
⚒ the speed of the winding winding
It is natural that the higher the rotation speed of the air box, the faster the bolts and nuts are loosened. Of course, this category also depends on the power and torque of the air box. The rotation speed of the air box is measured in revolutions per minute or RPM and is measured in an unloaded state. The smaller the size of the pneumatic drive box, the higher its rotation speed, and you can use it to open bolts and nuts that need to be opened quickly, but at the same time, they do not require a lot of torque and force to open.
On the contrary, the larger the size of the air box drive, the lower its rotation speed and higher torque.
⚒ Adjustable to rotate wind
A button or selector is placed on the body of the air box, which can be adjusted in two ways: forward and reverse. These two modes, which are also known as right-handed and left-handed, determine the direction of rotation of the air box.
If you put the selector on the right-handed mode, you can use the device to tighten the bolt and nut and in the left-handed mode to loosen the bolt. Take advantage of it.
⚒ Attention to the amount of torque or Turks (Torque)
You probably know that every screw needs a certain amount of torque to open or close. For this purpose, air conditioners are produced with different torque values so that you can buy an air conditioner with the right amount of torque according to your job and your purpose of using this device. For small instruments or anything where the maximum screw size is 16, look for a torque of about 350 N/m. If the screws used are 12 mm maximum, the torque of 150 N/m with a single hammer mechanism is suitable for you. . (Don't neglect choosing the right drive size and checking other points.) If you are working in an oil and tire repair shop and sometimes you encounter rusty screws, a torque of about 500 newtons is suitable for you.
⚒ Torque adjustable
A dimmer is placed on the body of some air bags, by which you can change the amount of torque. The way dimmers work in each device is different from another. In some air boxes, the dimmer is a rotating volume that changes the amount of torque from minimum to maximum. Or there may be preset values for the torque that you can increase or decrease the amount of torque according to the size of the nuts by changing the volume. This feature can be helpful and effective in an inflatable box.
Air box is one of the most widely used pneumatic tools, which is used for various purposes. To buy this product, it is necessary to get information about it and consider the points discussed in this blog. Of course, there are still many points in this field that we will review in future blogs.
If you want to get to know different models of air boxes and their prices, contact us at Bakhtiari Air Tools in Tehran.