Run Wall Post on Concrete Skeleton
Due to wall post regulatory sensitivities, you should pay attention to the details of wall post implementation. The way to implement the wall post in the concrete frame is that in the first step you have to determine the location of the wall post according to the map. Next, after installing the joint plates on the floor and ceiling, use fasteners to line up the blocks to connect the two separate walls. Be sure to keep the distance of wall post installation empty when running the wall.
If you do not run the base plate before pouring concrete, you must connect the plates to the beams from the top and bottom using roll bolts. 3 cm steel nails that are installed with a nailer are not a good choice for installing plates to beams.
Run Wall Post on Steel Skeleton
Given that in recent years, metal skeletons are used more for the construction of buildings, and since the lateral displacement of the metal skeleton occurs a lot; The use of wall posts in metal frameworks, especially in upper floors, plays a big role in curbing this change of location.
The implementation of wall posts in metal frameworks is almost similar to the implementation of wall posts in concrete structures; Of course, pay attention to the fact that in this implementation method, the post wall is connected to the column and beam by welding. You can use all kinds of welding machines for this.
What German can be used as a Wall Post replacement?
Bed rebar has recently been considered as an alternative to wall post. The advantages of bed rebar include: ease of installation, light weight of the structure, high strength, greater flexibility and strong connection of double-walled walls.
What is the Wall of Mesh (Wall Post Mesh)?
Wall mesh wall is a kind of coil and one of the types of post wall and it is made to contain and control non-structural walls. Wall meshes act like netting and are a great replacement for old wall posts.
how does the mesh running?
Wall mesh strips are placed vertically on the wall with predetermined widths. These strips made of fiberglass are temporarily installed on the wall during wall hanging using nails. Finally, the mesh wall is covered with gypsum or cement plasters.