One of the principles of building construction and the main covering of a building is tiling, which requires knowledge and awareness of tiling tips. In general, ceramic tiles are a type of covering and building materials that are used not only for the appearance of the building, but also to insulate the building from moisture, cold and heat.
Building tile tips
One of the first and most important tiling tips is that you should get tiles according to your needs. Choosing the right tile is one of the most important parts of the project implementation process. The tile must have a special feature.
Other important things in tiling include:
- Electing Kashei and Serimik Kaf
The selection of ceramic tiles
The tiles are available in a variety of designs and colors. Therefore, choosing the right tile is sometimes very difficult. It is worth mentioning that apart from the design and color, you should also pay attention to the dimensions of the tile. One of the important points of tiling is choosing the right tile for the size of the building. If the dimensions of the tile match the kitchen or building, you will have the least amount of waste and the least amount of cutting.
Choosing the layout of the layout
Choosing a tile design is one of the most important points of building tiling. Building ceramics and tiles can be implemented in various types such as rhombus, clay, brick, checkered, wicker, etc. Now we are going to briefly discuss some of these. The easiest way to lay tiles is to align the edges of each tile. This method has less scattering and causes less consumption of tiles and ceramics. In the rhombus design, tiles and ceramics are arranged at an angle of 45 degrees from the horizon.
Brick design is also a popular tile arrangement model. In this method, tiles and ceramics are arranged in such a way that the edge of each tile is placed in the middle of the edge of another tile.
Calculate the number of desired tiles
After you have chosen the desired tile design and also agreed on how to arrange the ceramic tiles, it is time to calculate the number of tiles to be used. You can get the required number of tiles just by having the dimensions of the required space and also the dimensions of the tiles. Of course, you must consider 3 to 15 percent deviation.
Flooring
The last thing you should do before tiling is the floor. Flooring is one of the most important parts of tiling. In this section, you must use an expert. To calculate the height of flooring, the highest point as well as the height of the tile should be considered. After the height of the flooring is determined, it should be done.
Building floors are usually made with concrete or cement. An important point about tiling the kitchen and bathroom is that insulation must be done before flooring.
Building tile tips
In the executive part, you should always pay attention to several important points. Among these tips that are essential in tiling any building are:
Level level alignment
One of the most important steps in tiling and one of the most important points of building tiling is the alignment of the tile placement. Before installing the tiles, the condition of the walls must be checked for levelness and verticality. Also, if there are any problems in the work or for any reason the place of the tile is not right, it must be fixed by a master tiler.
Cement sand mortar
In order to strengthen the tile, sand and cement mortar must be used. Note that the use of cement-sand mortar is mandatory for tiling, and mortars such as clay, ketchup, white cement, etc. should not be used under any circumstances. If a mortar other than sand and cement is used, it will cause the tile to not last in its place over time and it will fall.
Tile worse
is one of the techniques of tiling the tile before installation. They do this for adhesion between the mortar and the tile. Of course, it should be said that you should not put the tile in water so much that it will crack. It is enough just to increase the tile.
Proper strap
Tiling is considered one of the most important and important points of tiling. One thing that you should keep in mind is that you should always keep the width between 2 or 3 centimeters in pools and ponds. Also, the space between the tile and the wall is 3 cm. You have to fill all this space with mortar so that it doesn't fall and get damaged in the future.
