Stone
Stone building is one of the last steps to complete any building. Both the exterior and parts of the interior of buildings need a durable coating that is both beautiful and protective. The use of natural and artificial stones can be used as a suitable cover to achieve this goal.
Building
The types of stone work of the building will be different depending on the need and destination of the building. These types include:
Internal stone
In this method, stones are used in the interior parts of the building. This includes the masonry of the floor of the building, walls, stairs, island and counter, toilet and bathroom spaces, etc. Each part of the interior of the building requires a special method and type of stonework.
External stonework
In this method, stones are used in the interior parts of the building. This includes the masonry of the floor of the building, walls, stairs, island and counter, toilet and bathroom spaces, etc. Each part of the interior of the building requires a special method and type of stonework.
External stonework
This method is known as rock face and in it, ornamental and attractive stones are used to decorate the external parts of the building. Also, external stonework includes the use of stone to cover the floor and walls of the yard, parking lot and other parts of the open space.
The main steps of the stonework
The main and general stages of stone work are basically as follows:
Infrastructure
Substructure is one of the vital steps in building masonry that should not be completely ignored. Infrastructure refers to actions such as leveling the surface, cementing, insulation, sanding and other activities. Also, the installation of plumbing facilities such as heating and cooling systems should also be done before the masonry work of the building.
By providing the proper infrastructure, stonework can be used in the best possible way. This work creates a strong and stable foundation for the installation of stones, and by providing the necessary facilities for the installation of facilities, the main needs of the building are also met. The final result is in accordance with the expectations and the durability and strength of the building is guaranteed.
Cutting and installing rocks
After the foundation, the mortar needed to install the stones is prepared. The stones are then cut using precision measuring tools and set in place with lath, sand, and cement. The stone worker fastens and secures the stone in the desired location using a hammer. Mortar is used to increase the adhesion and strength of stones to the bed. Also, in certain cases, screws and dowels are also used.
Using Grout
After the stones are installed, the spaces between the stones are filled with grout or similar materials. This will help stabilize the stones and prevent them from moving.
Cleansing and filling the gaps
After installing and strengthening the stones, the surface of the stones is cleaned using a damp cloth or sponge to remove the grout on them. Also, to clean all types of decorative stonework, polisher is also used to make these stones look better.
By following these steps, stonework will be done in a principled and effective manner and will have a very beautiful and durable result. .