Installation of sandwich panels is done in different ways. Installation of ceiling sandwich panel is different from wall. In the following, we briefly mention each of them:
Installation of ceiling sandwich panels In this method, we usually place the sandwich panels on the secondary beams, which are generally in the form of profiles. The sandwich panels are connected using galvanized screws with washers. If they are screwed in a correct and principled way, it will be completely moisture-proof and there is no need to inject foam or other work. This installation requires a metal infrastructure. Installation of wall sandwich panels In this type of installation, like the roof sandwich panel, we need a metal infrastructure. The profiles should be placed perpendicular to the panel sandwiches in a fully engineered and accurate sound. This work requires a lot of precision, it must be leveled, and with this method, a wall can be built up to 13 meters long. Flushing sheet should be used to connect wall sandwich panel to ceiling. The sections of this sheet are designed and produced according to the dimensions of the project and are connected by screws or rivets. The installation operation, despite the convenience and speed, requires high precision, so use an expert team for this work if possible.
Sandwich panel price
As we said, a sandwich panel has different factors. The material of the metal sheets of this product is decisive. Also, the insulating material of this three-layer product is one of the functions of the final price of a panel. The thickness of the sandwich panel is another factor in the manufacturing cost and, as a result, the price of this product. Even if all these factors are the same, wall and ceiling sandwich panels have different prices. Usually, the ceiling type is more expensive than the wall type under the same conditions. This product is available in widths of one meter and above. The price of the wall and ceiling sandwich panel plays a decisive role in choosing the panel by the employer. Also, the importance and priority of resistance to environmental hazards is decisive. For example, the price of polystyrene insulation is cheaper than that of glass wool and rock wool, but it is weaker than other insulations in terms of resistance. But you can't forget this point, this product is considered new in the construction industry, and its total cost is cheaper compared to the traditional way of using bricks, cement, etc.