✔️ Switching Keying Machine
This type of device is the most important and can be said to be the most important key making device for making all kinds of household keys as well as a high percentage of car keys.
✔️ Computer Keying Device
With the introduction of the computerized key making machine, a huge revolution took place in the key making industry. Using this device, new keys called computer keys were made, which became very popular, because nowadays people use this type of locks and keys due to their high security. It should be noted that computer devices are used to make and produce keys with grooves or two lips of motorized keys.
✔️ Automatic keys (CNC)
The new generation of today's keys, which include automatic keys, including motorized and machine keys, require more accurate and delicate construction, which is not possible with the old devices that were manual. Today, a machine called CNC has made a great contribution to this field. The way this device works is that they take the chassis number from the customer, and then by receiving the cutting code from the manufacturer, they can cut the key of these specific car models.
✔️ Sabbeh
It is mastered in order to make the body of the lock.
✔️ Drill
It is used for drilling different parts of the lock such as handle and base. By passing a nail through the base and handle, it creates a rotating mode (it should be mentioned that the drill is available in both electric and manual forms).
✔️ Sohan
It is used to polish and shape the design on the lock.
✔️ Away
Its material is steel. In fact, they put the heated metal on it and hit it with a hammer until they reach the desired shape. Note that some of the anvils next to the wall have signatures and are written in pencil.
✔️ Clamps
It consists of two jaws that are opened and closed by a handle. This tool is used to hold the part that the key maker is working on. The material of the best clamps is steel. If you want to make locks of different dimensions, you should get clips that fit the dimensions of the locks.
✔️ Kamank drill
It is a type of hand drill whose work is similar to a lathe.
✔️ Chisels
It is a pen that uses a hammer to perform cutting operations and forms different cuts.
✔️ hammer
It is used to shape all kinds of metals, including iron and steel.
✔️ Hand tongs
If you want to hold the hot iron and tap it, you can use pliers. For this purpose, its handle is made as thermal insulation.
✔️ Claus
It is used to make and produce large screws.
✔️ Ball
This tool is used to make the opening of the lock. There must be a place inside the lock, such as a seat, for it to fit. By rotating the ball, a step is created so that it does not go down too much as a result of the lock and is placed in a suitable place.
✔️ Coal furnace
Because the metal in question must be heated to 1000 to 1100 degrees to soften, we need a furnace. Note that to heat the oven, it needs to be fueled by coal.
✔️ Hadith
It is called a tool that is used to make small screws that are used for the parts inside the lock.
✔️
Different types of pliers that can be used for blacksmithing, which include pen grippers, thick grippers, or thin grippers, can also be used in lock and key making tools.
✔️ Forcing the base
In fact, it is the same mandrel, with the difference that its head is not round, but rectangular, which is used to make the base of the lock.
