Sauna and Jacuzzi should be considered two lovely spaces for the general public. These two are very popular among people due to their therapeutic and recreational properties and encourage everyone to have these two in their home. Jacuzzi should be considered as a space complementary to the swimming pool, where about 90% of its equipment is the same as the swimming pool, but because the sauna has different uses and features, other facilities and equipment should be used for its construction.
What is the hot water or jacuzzi?
Hot tubs, which are known as whirlpool pools or mostly known as jacuzzis, were built in 1920 by a company with the same name. In the beginning, it was used to treat rheumatism, but over time, it gained great fame. Among the most important components of Jacuzzi facilities, we should mention the built-in nozzles, which inject water with high pressure. They pour a jacuzzi, this process gives a person a sense of relaxation, and the contact of the water with the person's body provides healing properties. Usually, the most popular materials in the construction of a jacuzzi are stones and tiles, which are often used around and inside the jacuzzi. They are used. In this type of jacuzzis, the necessary preparations must be calculated and purchased separately. The following can be mentioned from the jacuzzi facilities:
- Sand filter
- Filter media
- Heat exchanger
- Pump
- Jet pump
- Disinfection systems (device UV, salt chlorine and chlorine injection pump)
It is important that due to the rapid pumping of hot water, body fats are constantly added to the water. Therefore, installing sand filters and water purification devices is essential. It is considered a jacuzzi. The reason for using it is heating and as a result increasing body sweating, this is also noticeable in sauna facilities. Among the water heating systems, the following should be mentioned:
- Boilers
- Heaters
- Heat exchangers and...
Piping in Jacuzzi facilities
One of the other important parts is the piping system, which is responsible for routing and guiding the water. In this system, several valves are used for draining water, so that if one of the valves is blocked due to a person's hand or foot, the other valves will perform the draining correctly. Sometimes, due to the low depth and suction power A whirlpool is formed. For this reason, the drain valves are equipped with anti-vortex convex caps. These caps actually prevent this from happening.
Water circulation pump in jacuzzi facilities
In general, the pumping system is an important part of swimming pool, sauna and jacuzzi facilities. Is. The water circulation pump has the ability to deal with the pressure drop that occurs in the water path. Also, providing the desired water flow rate is one of the other capabilities that this system should have. It is used that they can play an effective role depending on the function of the jacuzzi. If the pump pressure is low, a bed suitable for gentle massage and water circulation will be provided, and if the pump speed is high, the necessary conditions for high water pressure will be provided.
Cartridge filters
These filters are often used in sauna facilities. Due to the great impact it has on the facilities, it is necessary to pay attention to this issue in the jacuzzi, because many people sit in a small volume of water, the water pollution will increase by itself. For this reason, the use of these filters in jacuzzi facilities is very important.
What is a sauna?
The sauna is also one of the other side places of the pool, which, just like the pool and jacuzzi, focuses on water therapy, and in terms of facilities, it should be divided into two parts: dry sauna and steam sauna.
< b>Dry sauna
Dry sauna facilities use hot and dry temperature to make the body sweat a lot, which removes toxins from the body.
It is possible that high temperature Dry sauna may seem shocking to people who do not have the experience of entering such a place, but due to the low humidity in this space, the human body can tolerate being in this place and there is no problem in this field. On the other hand, it should be mentioned that with all these interpretations, dry saunas can irritate people's lungs due to low humidity and high temperature, and it can be dangerous for people who have lung problems.
Steam sauna
The purpose of building this sauna, like the dry sauna, is to make the body sweat a lot to get rid of body toxins, but this method has a major difference compared to the dry sauna, because in this type of humidity 100 A percentage is used compared to the dry sauna, and as a result, it should be noted in the facilities that 100% humidity required for the steam sauna is provided. The desired temperature range for a steam sauna is between 40 and 50 degrees, and if the temperature exceeds 50 degrees, it can lead to burns, blisters, swelling, etc.