☑️ Everything About Crankshaft
Exhausts, as one of the main parts, play a vital role in the car system and guarantee the health of the engine. But in addition to this part, there is also a crankshaft in cars, which plays a vital role in the movement of cars. But if a car faces a basic problem, i.e. burning oil, it will need to be turned. During turning, the crankshaft will also be cut and will have a different appearance. The exorbitant costs of turning this piece are sometimes a source of surprise and concern for many people.
☑️ Language with the help of three systems or four single systems
In this method, the jaws of three or four systems move independently. After calculating the amount of crank and drawing the work piece, the center of the crank is precisely adjusted by moving the jaws. Then, each of the jaws is fully tightened and the operation of drilling and chipping is performed.
☑️ Camera with the help of special fixtures
Carving the crankshaft is one of the most important and sensitive parts in car repairs. Therefore, it should be very important and pay attention to make the crankshaft in a place that is suitable and accurate for the needs of the car and suitable for the type of crankshaft structure. One of these methods, as we have said before, is by using fixtures, which are used to make crank parts in mass production, and for the sake of uniformity and high precision in production, special fixtures or fasteners are used.< /span>
☑️ Language between two birds
This method is one of the most accurate methods of making a crank. It can also be used for long pieces. In order to determine the crank centers in this method, first the two ends of the workpiece are faceted. Then, according to the map, they perform the line drawing and mandrel marking operation, and finally they start drilling the bird.
☑️ Language steps between two birds:
The construction of the hinge between two birds is done according to the following steps:
Preparing the raw piece (forehead shaving, face shaving)
Drawing the forehead of the work piece in order to determine the center of the work piece and the center of the crank with the help of the relevant tools and based on the map and related principles and techniques.
Mandrel for marking the center of the work piece in order to perform the bird drill.
Drilling a bird using a column drill machine and according to the relevant principles and techniques.
