Sharpening diamond saws Diamond saws are washed before sharpening to remove any impurities from the metal surface. The back part of the diamond teeth, which are part of the C.V body, is removed by VOLLMER/AX 810 machines so that it does not have any problems during cutting and prevents heat generation during cutting. After removing the back of the diamond saws for the FACE operation, they are placed in front of the CHCECO machines of this center to cut at the right time with different diamond stones that are available for each type of diamond tooth. It is installed on the machine and the grinding operation begins until the outer edges of the diamond teeth that are responsible for polishing the cutting wall are done and reach the sharp and cutting surface they need. After the insertion operation, the blade of the diamond saw is prepared for the sharpening stage of the outside of the tooth (TOP) after identifying and calculating the angles of the tooth base type, identifying the angles on the diamond tooth. The obtained sizes on the VOLLMER/CX 100 CNC machines and after entering the obtained sizes in the memory of the CNC machine and recording the sizes, the machine starts working automatically and the diamond saw is required to be as sharp as possible. delivered After the end of the sharpening operation, the diamond saws are placed in a special oil that is used to prevent the saws from rusting, and the packaging is done according to international standards.
Sharpening of diamond and HSS blades Service of all kinds of diamond and HSS hubs, fixed welding tools In these cases, due to the presence of numerous and advanced machines, in line with the sharpening of diamond and HSS balls, the tooling machine and tooling machine have excellent quality and have maximum precision. Service of all types of tops, polishing balls and forming diamonds Service of all types of polishing ball blades and diamond forming The blades mentioned above are disposable in the international standard and cannot be sharpened again. Therefore, due to the high price of the mentioned blades and the lack of easy access to these tools in Iran, Persepolis Sharpening Saw Complex has the ability to sharpen these types of blades in Iran with special machines. It should be noted that the above blades They can only be sharpened twice, and each time the sharpening operation reduces the working efficiency of these razors.
Rib blade sharpening
Service of all types of diamond, HSS and CV blades in Persepolis complex, with advanced machines for diamond, HSS and CV blade sharpening has had These types of commercial graters usually become convex or concave after sharpening. This problem has been completely solved in this complex, and after sharpening, a completely smooth surface can be seen on the grater blade. It should be noted that after the sharpening operation, the polishing operation is done so that there is no need for pleating and it is easily installed on the device and has the necessary performance as soon as possible.
