☑️ What is concrete foam?
After the concrete is mixed with the help of a concrete mixer at a reasonable price and poured on the surface of the desired building, it is necessary to smooth its surface. The only way to make concrete surfaces smooth and uniform is to floor it. This operation is done with the help of a concrete floor machine. Usually, the sub-concrete machine is seen in small or large dimensions and weight. For this reason, they have the ability to respond in small and large projects. Due to the important use that can be seen in this device, its existence is required in all projects. Because without a floor machine, smooth and homogenous operation of concrete does not take place and the structure becomes irregular.
☑️ What is the steps of concrete?
At first, we need to install the diamond bits in the lower part of the device. After that, we start the sanding operation with rough bits and reduce the roughness of the machine in several consecutive steps. Because using a diamond bit cuts concrete pebbles. This operation is different depending on the type of device and the method you choose for subbing. However, the existence of these diamond bits is the main factor of grinding. The process of concrete flooring is done through the bites made in the steps of concrete flooring. These bits are connected to the rotating plates of the device and with the rapid rotations of the device, they rub the surface of the concrete stones and through this process, the surface of the concrete is completely smoothed. In this process, the bits made with precision and in correct coordination with the machine are easily connected to the rotating plates so that the concrete flooring steps are done in the best possible way. This technique guarantees the improvement of the quality of the concrete surface and prevents the creation of unevenness and defects in buildings. Also, by using this method, the structure of the concrete is done in a more uniform way.
☑️ Concrete Flooding Steps
1. In the first stage of concrete flooring, a rough diamond bit is used for concrete flooring. This bit removes extra layers and roughness of the concrete surface with great precision and power, so that the concrete surface is ready for the next stage of the concrete flooring steps.
2. In the second stage of concrete paving, a softer diamond bit is used. This type of bite is considered as an intermediate option between rough and soft bite. By using a softer diamond bit, the concrete surface achieves a balanced hardness and softness. These stages of concrete flooring are important because the surface of the concrete must be smooth after removing the unevenness.
3. In the final stage of the concrete flooring steps, a softer diamond bit is used again to implement the concrete flooring steps. However, at this stage, due to the improvements from the previous stages, the concrete surface reaches a very smooth and smooth standard, and the concrete flooring stages are completed.
☑️ Types of Concrete Floodity
The concrete sanding machine can also exfoliate concrete up to about 4 mm. Due to the importance of this device in many projects, floor machines for concrete are produced and sold in various types. For this reason, the variety of machines with which they make carpets is very large and they can be seen in different types such as German, Italian, etc. Each of these devices has several advantages and disadvantages. For this reason, the devices are fundamentally different from each other, which has made each of these devices suitable for a type of surface and a type of concrete.
☑️ Manual foam
It is the first hand-type paving machine for concrete. This device can be used in small projects due to the lack of fuel, light weight and small dimensions. Because if it has a large weight, because no fuel is used in it, it will have a hard attack capability. On the other hand, due to its high maneuverability, it has advantages such as being used on angular and uneven surfaces.
☑️ Motorbike
One of the disadvantages of manual concrete paving is the lack of a powerful motor. For this reason, motorized concrete flooring was launched on the market. This concrete sanding machine is suitable for projects with a large operating space due to the presence of a motor. On the other hand, the presence of a motor in it has increased the work speed. The high speed causes fast removal of glue, paint and other items in this way. Concrete flooring steps become easier with this method.
☑️
One of the new models of the concrete paving machine is that this machine can also carry people. For this reason, the device is guided by the operator who rides it. This type of device is suitable for projects that have a very large hall. Because it becomes very difficult for people to carry the device in large halls. The operating diameter of this device is 1.5 meters and therefore it creates a smooth and shiny surface.
☑️ Three phase foam
Electricity is always one of the energies that facilitate people's work. This energy is also useful in flooring machines. In projects where access to electricity is visible, the use of three-phase concrete flooring is recommended. This type of device has become one of the powerful and high-speed devices with the help of electricity. For this reason, it is suitable for projects that have larger dimensions than other projects. The stages of concrete flooring with the three-phase flooring method for heavy projects may be a little difficult.
☑️ How to work with concrete
More method flooring: As the name of more method flooring is clear, a material is used to remove dryness and dust from the surface. The advantages of this method are things such as longer service life of the subs of the device, increasing the life of the engine and increasing the speed of operation by about 3 to 10 times.
Dry flooring: unlike the previous method, dry flooring does not require water. For this reason, a strong dust collector is used to prevent dust from entering people's bodies. As a result, its advantages are things like not producing slurry, being fast and reducing water consumption.
☑️ What is the use of concrete marshes?
The benefits of concrete flooring are not hidden to any person who works in this field. These advantages include the use of quality stones, equipped with a dust cover chamber, the ability to adjust the speed and having a control box. All these advantages have caused this device to be used more and more in construction projects. Applications that encourage anyone to use paver for concrete and no contractor has ever complained after using this tool properly. The application of the concrete screed is as follows:
Eliminating concrete surface damage
Fixing concrete irregularities
Increasing the durability and lifespan of the structure floor
Repair of broken surface parts of concrete
Removal of small and large gaps
☑️ What do we do when working with concrete foam?
After you know the steps of concrete flooring, it is better to observe some things. Today, concrete sanding is known for many operations. As a result, in order to get the desired result, you must follow some points when working with this device. In addition to these tips, it also increases the lifespan of concrete flooring. These cases are such that you should never expose the electric motor to moisture, because water and moisture are the main causes of engine failure. The next thing is to give the device regular rest, turn off the device at regular intervals while working with the device. When using the device, use safety equipment such as glasses and gloves. Use a dust collector when you do dry mopping.
