What is the Liquid Gas Storage Technology?
Liquid gas storage tank, an iron tank with thicknesses of 6, 8 or 10 and 12 mm.
This tank is welded in three basic steps.
First, the root pass using electrode welding, then the second pass using CO2 welding, and finally the final pass using a sub-powder welding machine.
As mentioned in the material of tank construction, all pressure tanks are designed with ASMEVIII software.
As you know, gas storage tanks, especially liquid gas, have a pressure of over 10 bar.
As a result, we must observe all the standard points during the construction because failure to observe the safety points will be dangerous.
ما Store of liquid gas storage reservoir
1. Reservoir design in ASMEVIII software
2. Mechanical map design
3. Designing a workshop shop map
4. Receiving the approval of construction plans from the employer
5. Analysis of purchased material
6. Perform the cutting steps according to the plan
7. Making forming cap and lens
8. Preparation of loose sheet welding
9. Assembling and rolling the cylinder
10. Mounting the lenses on the shell
11. Installing flanges and nozzles
12. Loose ironing and underlayment
13. Root pass welding of liquid gas storage tank
14. Construction and installation of foundations (if present in the map)
15. Hydrostatic and radiographic test
16. Painting
17. Packaging and delivery
Make meters
2. A516 sheet alloy with grade 70, thickness 6, 8, 10 and 12
3. Blade base
< span style="white-space: normal;">4. Final sub-powder welding
5. Connections of class 3000#
