In some cases, we may not have access to a good expert. In these cases, we have to do the work ourselves and investigate the problem of electric shutter failure. Spontaneous opening of the garage door is one of the types of failure in the electric shutter.
If we realize that an expert is not needed, we can fix it ourselves. In the following, we will mention ten major failures of electric shutters. The first thing you should do is check whether the electric shutter motor is healthy or not. Check if the electric shutter motor is on. In some cases, when the electric shutter does not work, it means that the shutter motor is most likely off.
In the first step, check the electric shutter motor or the power supply of the electric shutter. But If you notice that the engine is working properly and is on, but the shutter does not go down, be sure to contact the experts to solve the problems.
⭕️ Be sure to check the second stage of electric shutter. Because the electric shutter connections may have a surface problem. According to the experience of consumers, in these cases, the failure of the electric shutter may be due to the electrical connections. So be sure to check the electrical connections. According to experts, some parts and connections of the electric shutter may also be loose. So check them too and contact us if you encounter any problems.
⭕️ Sometimes the reason for the electric shutter not working and its damage is due to overheating of the engine. In such cases, the engine gets very hot and stops working. If this happens to your electric shutter and the motor stops working due to high heat, be sure to turn off the motor and give it a rest. After a few minutes of rest, when the engine has cooled down, restart it. Test and check the electric shutter again and if the problem is still not solved, contact the experts.
⭕️ In the fourth step, test the remote control of the electric shutter. According to experts and consumers, the failure of the electric shutter may be due to the failure of the remote control. In addition, if the remote control has been hit for any reason and water has penetrated into it, the power may fail. In such cases, be sure to replace the remote control of the electric shutter so that your electric shutter starts again and works for you. This point is one of the points that rarely occurs to consumers. In the fifth step, go to the electric shutter yourself and if you see that there is an obstacle in the way of the electric shutter, remove it. Sometimes Sometimes, some obstacles may cause the shutters to get stuck and prevent the shutters from going up and down. In these cases, be sure to clean the path of the electric shutter so that it can go up and down easily. After doing this, turn on the engine and check the electric shutter again to make sure its operation is correct.
⭕️ One of the most important points in the failure of the electric shutter is that the blade of the electric shutter is damaged or breaks in some cases. Needless to say, if wear occurs in this part, the electric shutter may fail. Test and check the electric shutter blade. This part is one of the most important parts in the electric shutter, if it has a problem, it may put pressure on the electric shutter motor. If this problem happens to you, in order to avoid additional costs, show it to a professional and knowledgeable expert so that your problem can be solved in the shortest time and with high quality. In the seventh step, know that The electric shutter has a sensor called eye sensor. This sensor is one of the most important parts of the electric shutter. The eye sensor may be out of order, which prevents the electric shutter from working properly. It is interesting to know that if an eye is dirty and has the slightest damage, it cannot work properly and prevents the electric shutter from working properly
⭕️ In some advanced electric shutters, there are operating codes. The electric shutter works according to these codes. These codes may be wrong for some reason. And they cannot give the correct command to the motor to raise and lower the shutter. If this happens, it is very likely that the electric shutter would fail and need to be repaired.
⭕️ The ninth reason that the electric shutter fails is the failure of the electric shutter shaft. If you know, this part is very important and is considered one of the main parts of the electric shutter. If the shaft of the electric shutter has a technical problem for any reason, the electric shutter will definitely fail and will not work properly. The signs of this failure are the opening and closing of the shutter. And in simple words, in these cases, the oil gets stuck and must be repaired as soon as possible. Electric shutter arm jacks are among the most important shutter parts. If these jacks, which are very important, have a technical problem for any reason, the electric shutter will definitely fail. If the jack is broken, the door will not open and close in any way and will remain in place. Jack failure is one of the most frequent and important failures of electric shutters. Take the failure seriously and solve it as soon as possible. Shop shutter repair should be done by a repairman.
