Scaffolding is one of the structures that are used for building at heights. Paying attention to the safety points of scaffolding installation is one of the issues that must be paid attention to during the installation of this building structure. Because not paying attention to the safety tips of scaffolding can cause accidents and even threaten the lives of construction workers. The quality of the scaffolding pipe is also one of the factors that should be taken into account in this direction.
The most important safety tips are the scaffolding to consider!
✔️ The maximum distance between the legs of the ladder should be 30 cm.
✔️ The distance between the vertical legs of the scaffolding is a maximum of 2.3 meters in light structures and a maximum of 1.8 meters in heavy structures.
✔️ Climbing the scaffolding by means of ladders Hand-made is prohibited.
✔️ The minimum distance of scaffolding from power lines less than 300 volts, one meter, and from power lines above 300 volts should be more than 3 meters.
✔️ Scaffolding horizontal pipes should not be more than 2 meters from each other.
✔️ Scaffold parts should not be painted; But you can use stainless materials for them.
✔️ The bottom surface of the scaffolding must be completely firm and strong.
✔️ The load of the scaffolding must be evenly distributed on the platform. must be done to prevent the structure from moving and shaking.
✔️ You should never lean on the fences and scaffolding guards.
✔️ The angle of the ladder and the surface should be 75 degrees. Scaffolding bases are made of nut fasteners.
✔️ Scaffold pipes and their connections must be of the highest quality available in the market. Humidity and pressure should be kept.
✔️ The wooden boards of the platforms in the scaffolding should have the same thickness.
✔️ It is forbidden to work on the scaffolding in bad weather conditions.
Scaffolding safety and work in height
Scaffolding is a safety device used for working at height and helps workers to fall from a controlled height in case of a fall and reduce the injuries that may be caused by the fall. To use scaffolding optimally and increase the safety level of work at height, you can consider the following as a guide:
Scaffold inspection: Before any use of scaffolding, You must be sure of its status and performance. The use of scaffolds with scratches, wear, breaks or scratches should be prohibited and they should be repaired or replaced. Correct installation of scaffolding: Scaffolding should be installed correctly and precisely. and make sure of their high strength.
Choosing the right place: Before installing the scaffolding, you must make sure of the suitability of the installation place and the stability of the scaffolding.
Training of workers: Workers must be aware of how to use scaffolding and its operation. and replace if scratched.
Regular inspection: You should check scaffolding regularly and fix any problems.
Using equipment Additional safety: You should use additional safety equipment such as airbags and gloves.