Normally, when cooking and frying food, excess oil is poured on the cast irons and all other parts of the gas, which gives a bad look to your gas. Removing grease is very hard work, especially cleaning cast iron gas. Gas cast iron may still have stains after cleaning in the usual way. Since one of the most important parts of the Eid moving house and cleaning the kitchen is to clean the gas in a basic way, in the rest of this article, some methods are given to clean the grease of the gas cast iron.
How to Wipe Fat from Gas Cast
If you have glass gas, read how to clean gas glass. If you are looking for the best way to remove grease from cast iron, try the following methods. You may have tried cleaning cast iron with a pipe opener, but this time you prefer to do it without chemicals. There are several home methods to remove grease from cast iron, which are introduced below, such as cleaning cast iron with baking soda, salt, soap, lemon juice, soda, etc. It is also explained to clean cast iron with chemical methods such as pipe opener, ammonia, scale remover and Vitex.
Before you start cleaning the gas cast iron
The ribs on your gas stove are probably cast iron, so be careful when cleaning them. Avoid steel wool or any metal pad for cleaning. The best way to clean is to use a heavy brush, non-scratch nylon scrubber or sponge with a cleaning solution such as cleaning powder or baking soda. If chemicals (such as ammonia) are used to clean the ribs If you use your stove, always wash it with warm soapy water and prevent rusting by drying the ribs before putting them back on the stove.
First Method of Cleaning of Gas Cast: Lemon juice
Put a large pot on the heat. Put the cast irons in the pot and pour water on them.
Cut a few lemons and put them in the pot and add some salt.
Give 15 minutes for the water to boil. Then take out the cast irons and use a dishwasher wire to clean the grease.
Second Method for Cleansing Fat from Cast Gas: Drinks
Put the cast irons in a suitable container. Pour 1 cup of baking soda on the cast irons. Then pour the carbonated black soda on the cast irons to cover their surface. Give it 15 minutes and then take out the cast irons and let them dry a little.
Put the cast irons in a container again and pour boiling water over them. Then add baking powder and lemon juice and give it another ten minutes.
Take a wire squeegee and apply some colored toothpaste on it and then rub all the cast irons.
Third method for cleaning the stove casting: Open Tube
Place the cast irons in the dishwasher and spray them with pipe opener. so that it reaches all the cast irons. Give it 1 hour and then grind with fine wire. This method is very suitable for hard and old fats. But when using the pipe opener, be sure to use gloves and do not have any skin contact with the pipe opener.
Method Fourth: Soap & Powder Cleanser
Place the cast irons in the sink (if your sink is not big enough, you can use a plastic bucket). Add boiling or very hot water to the sink, pour dishwashing liquid into the sink and make a soap and water bath. And let them soak in hot water and soap for 10-15 minutes. After soaking, use a stove cleaner and scrub the cast iron ribs with a stiff (non-metallic) brush, sponge, or non-abrasive nylon scrubber. Finally, rinse and dry the cast iron ribs and put them back on the gas.
Fifth Method: Sweet Pimple
Baking soda with very hot water or boiling water can easily remove grease and stains on gas. All you have to do is put the cast iron in the sink and pour hot water over it and then scrub it with baking soda. This method can easily clean your gas from any oil and stains. For more efficiency, you can add salt to the mixture of water and baking soda.
