One of the natural wealth of any country is the minerals found in it, which provide the basic materials needed by other industries to make practical and daily life items. Minerals that are located near the surface of the earth are extracted from the earth with the help of open pit mining method and minerals that are located deep in the earth are extracted from the earth by underground mining method. After the minerals are taken out of the earth, special operations such as crushing by various industrial stone crushing machines must be performed on them so that they are ready to be used in other industries. To go through it is to be in the narrow lines. Crushing lines consist of various stone crushers that are responsible for crushing minerals into smaller pieces. Stones show different behaviors when crushed, one of them is powdered and the other one does not shrink easily due to its high hardness. Due to the great difference between mineral stones, various stone crushers were designed and marketed so that each factory can buy one of them depending on its needs.
industrial crusher divided into several categories?
Types of stone crushers depending on the location in the production line, divided into three categories: primary stone crusher, secondary stone crusher and tertiary stone crusher be. Primary stone crushers are placed at the beginning of stone crushing and have the ability to reduce all kinds of stones, such as jaw crusher and hydrocon. After the stones are shrunk by the primary crusher, they enter the second stage of crushing and are made smaller by the secondary crushers. If the size of the stones is still large, another step is added in the production lines, which are often used in sand production factories. In the third stage, the stones from the secondary crushers enter the sand makers and are turned into very small pieces.
Introducing Types of Industrial Crusher
In mineral processing lines, the first crusher that is placed is the jaw crusher. This stone crusher has the ability to crush stones with a high degree of hardness, and despite its very strong body, it does not need to be repaired easily. Inside the jaw crusher, there are two fixed and movable jaws, and the stones are turned into small pieces by being placed between these two jaws and with the pressure caused by their movement.
The jaw crusher is produced in various capacities. which production lines can buy one of them depending on the expected output. The capacity of each crusher shows that the machine is capable of crushing several tons of stone per hour. Usually, the material of the body and parts of this stone crusher are made of manganese steel to show high resistance against the impact and hardness of the stone. Jaw crusher is widely used in the mining, construction, metallurgy and road improvement industries.
Qubit stone crusher
Another widely used industrial stone crusher is the Qubit stone crusher, which is also known as impact crusher. The process of crushing stones in this device is done with the help of incoming blows from the side of hammers, and for this reason, it has been given the name Qubit stone crusher. The stones reduced by the jaw crusher are sent to the qubit crusher to reduce their size.
After entering the qubit, the stones collide with hammers, which, in addition to reducing the size of the minerals, are thrown towards the machine's anvil. Inside the anvil of the Cubit stone crusher, hammers and clamps are installed, which crush the stones when they are hit and continue to do so until the stones reach the set size. Kubit stone crusher is very popular in various industries due to its high capacity and considerable power, and its maintenance costs are lower than other stone crushers.
Hydrocon stone crusher
Hydrocon stone crusher is used in the primary or secondary stage of production lines and has the ability to crush very hard stones. The miniaturization of minerals in the Hydrocon crusher is done by closing the gap between the mantel and the conqueue, and the automatic lubrication system prolongs the life of its parts. Hydrocon crusher parts are made of molybdenum manganese steel and will have a very high resistance to all kinds of impacts. Among the positive features of Hydrocon crusher are high resistance and power, strong body, maintenance and repair costs. Suitable, long life of parts and automatic lubrication system.
