In this case, many people think that they can easily install the stone slab by themselves by preparing the glue, but this is not correct at all, but it is necessary to measure the area correctly, provide the proper structure before installation, the execution process and leveling. should be done based on a series of specialized principles; Otherwise, it can cause problems in the long run. If you intend to install stone slabs, it is better to follow all these points:
Slurry method cannot be used for slab stones: Plaster surfaces are usually not considered a suitable option for underlayment. In the glue method, chassis drawing must be done with high precision. If you are planning to do a project based on slab stones, be sure to transport it properly and keep in mind that sudden impacts can damage it. The dimensions of the stone slab should be chosen according to your project, especially for wall installation, a series of special devices and tools are used. Mini cranes and vacuums are among the most common tools that can be used to do this. These devices allow you to easily remove slabs with large dimensions of about 2 to 3 meters and install them in the place you want. Of course, stone transportation must be done with great care.
major methods of slab stone
Usually, slab stones are installed on the floor, wall and ceiling, and these three parts can be considered the main and most important places of implementation of this material. It is a little more difficult in the execution method under the roof than other methods. The next issue will be the installation on the wall, which is usually based on the execution of places to pass the node. It is necessary for the centers that accept this task to use skilled and experienced technicians, to have devices and practical tools for transporting stone and Having technical approvals and a valid resume in this area is one of the things you should pay attention to. Stone slabs are also installed dry, in which case glass behind the stone can be used. Of course, it is the responsibility of the person who is responsible for the implementation of the project.
