✅ Claimer safety
Climber is a type of construction lift with a special basket with a minimum length of 2 and a maximum of 6 meters. This device can be used for tasks such as cleaning and repairing the facade of the building and moving workshop equipment. Climber is a very suitable substitute for construction scaffolding and significantly reduces the cost and time of installation compared to them. The climber is moved by winch motors that are connected to its supporting legs with a special towing wire and is equipped with an emergency brake. Climber safety requirements play an important role in ensuring the safety of the use of this equipment. Climbers play an important role in the ease of doing work in most construction projects, but they also create potential risks that will become actual and cause irreparable damage if safety measures are not followed by any user.
✅ Claimer safety principles
🔰 To ensure the safety of the climber, don't put extra load on it and don't try to reach the inaccessible parts of the basket (as shown in the figure). The extra load may put too much pressure on the towing wire and cause an accident. 🔰 Using a rusty, knotted and damaged towing wire for the device greatly reduces the safety of the climber. Such cables should be replaced immediately. During the periodic inspection of the climber, all the defects of the towing wire are identified and reflected in the report.
🔰 To increase the safety factor of the climber, all stages of assembly, disassembly and any structural changes in them must be under the full supervision and control of expert inspectors. and done competently. After each step of moving the climber, it is necessary to obtain the climber's health certificate again.
🔰 After moving the climber and before launching, all the inspection and load test steps of the climber must be done under the supervision of trained engineers. The climber must be controlled by the operator once a week. All wire ropes must be checked before each work shift. 🔰 Repair and maintenance procedures of all climber equipment and accessories must be done correctly. All repair reports, weekly inspection reports by the operator, as well as inspection records must be recorded and kept. To increase safety, the climber must be equipped with a safety wire system, and when installing the climber, the wire must be towed. Safety and automatic safety parts should also be installed correctly. No one under any circumstances is allowed to manipulate this system, change its settings or disable it.
🔰 The use of the climber must be done by people at least 18 years old and trained. At all stages of using the climber, these people must wear the safety belt for working at height and connect it to the rescue rope (independent of the climber).
🔰 A sign containing information such as the permitted load, the number of permitted people, and inspection. The performed actions should be placed on the climber and visible to its users. This sign should also remind you to fasten the safety belt for working at height and connect it to the rescue rope.