Behzi

Tips on elevator maintenance

Tips on elevator maintenance

Unspecified

Reading Time 1 Minutes

There is no system and mechanism that does not require periodic maintenance and review. Here, a device such as an elevator, in which safety is the first word, is very important and has a special role, and malfunctions in it cause life risks. Elevator repair and service is usually done on a monthly basis by the company with which you have an elevator purchase and installation contract, and from the same company, installers and people with experience in this field are sent to carefully check all the cases.

Of course, it should be noted that the contract party and elevator maintenance company have no responsibility for the repairs of defective parts. This point is also important. The parts that make up the elevator are very difficult to troubleshoot. It must be noted that its repair and troubleshooting should be done by a skilled installer and repairer who, in addition to knowing the parts of the elevator, has full knowledge of the opposite effect that each part has.

Primary and preliminary training should be When the elevator breaks down, in case of breakdown and any accident, we inform the person in charge of elevator maintenance in the building to repair the elevator as soon as possible. This information will prevent possible high costs and also increase the safety of the elevator.

Important parts in elevator repair

نکاتی درباره تعمیر و نگهداری آسانسور

There are important parts that make up an elevator. These parts include:

Engine: The engine is the heart and center of the elevator, which is usually seen in most cases that the problems are in the elevator engine and in the elevator gearbox. One of the causes of engine or gearbox failure is continuous vibrations that must be addressed. The elevator travel between floors is during start and step. The main reason for this vibration is the laxity of the elevator gearbox.

Control panel: In this section, the faults that exist are usually due to the wear and tear of the elevator parts in the control panel. Factors such as input and output of improper voltage and amperage from inside the steering panel parts can be mentioned, which leads to the wear and weakening of the parts inside the steering panel.

Cabin: Mainly the defects in this section are vibrations inside the cabin and can be felt. These types of defects can usually be from the bearings and snails inside the gearbox.

Door: Damage and problems that exist in the case of doors are probably caused by shoes or contacts. or tubes and originate. These factors and failures are due to improper use of doors. For example, holding the elevator door and preventing it from closing will eventually cause the elevator door to fail.

Post Author

2373

common:article

View Page

Similar Posts