Here we introduce 3 methods to distinguish between good and bad isogam:
1- The smell of isogam
The easiest way to recognize is through the smell of isogam. In the production of high-quality isogams, polymer or low-quality is used, if in the low-quality sample, mineral powders or non-polymer materials are used, that is why the low-quality and counterfeit type of isogam has an unpleasant smell and similar to industrial diesel (diesel fuel). ) gives.
The sex of isogam
Put your hand on the part of the outer layer of Isogam that is not covered, if it is good, nothing will stick to your hand. But if it is of poor quality, small black particles will stick to your hand.
2- Maintenance in the freezer
Cut a small piece of isogam and put it in the freezer, take it out after 2 hours and bend it by hand to an angle of 120 degrees. If the isogam broke or even cracked because you bent it, the isogam material is not good and is of poor quality. But if nothing happened to it, it means that it is a high-quality isogam and it is resistant to cold and heat.
What season is suitable for isogam?
Perhaps you have also heard that summer is the right season for Isogam. If you have chosen the summer season to install Isogam, you can be sure of the durability and life of your Isogam. It is used, the most important factor that affects the durability of isogam. Dry and clean is the surface we want to glue, the warmer and cleaner it is, the glue sticks better and does not stick. (The parts that don't stick well and the air stays under it)
