Providing all the design and manufacturing services of industrial parts with CNC machine
The cnc machine consists of a mini computer or microcomputer which basically acts as the control unit of the machine and the additional hardware circuits in the control unit have been removed as much as possible. This computer is responsible for sending the necessary programs for cutting or engraving metals and non-metals. In fact, all the work steps and the final dimensions of the parts are sent to the machine through the computer.
For this reason, CNC cutting can be considered as a robot that works with programming and follows your instructions. In the CNC cutting machine, the program is stored in the computer memory and the programmer can easily write and edit codes, programs and requirements. The written program can be used for different parts and there is no need to repeat it again.
Almost all materials can be machined using CNC, which is called CNC machining. But in general, the choice of primary material will depend on the type of activity and the product you are considering. Commonly used materials are: aluminum, brass, copper, steel, titanium, foam wood, fiberglass and all kinds of plastic.
Different tools can be implemented and used on the CNC cutting machine, among which we can mention lathe, milling machine and drilling machine. By removing and removing parts of materials, including metals and non-metals, these tools make them into different shapes and designs (round, square, etc.).
In traditional methods, the presence of the operator and his supervision of the work process was necessary, while in the CNC machine, the role of the operator is minimized and only the program and instructions must be executed in the computer and the rest of the work will be done automatically by the computer.
CNC marks usually fall into one of these two categories:
Normal machining technology, this category includes the following technologies:
Drills: This tool creates new designs and shapes by rotating and penetrating into the target piece.
Lathe tools: These tools rotate the parts against the movement of the drill bit. This tool usually makes direct contact with the material. These machines use rotary cutting tools to remove material from the main part.
Milling machines: These machines can be considered the most common CNC machines.
New machining technology, this category includes the following:
Electrical or chemical machining: Today there are new technologies that use special techniques to cut materials. In this field, we can mention electromagnetic machining and electrochemical machining. These technologies are very specialized and are used in special cases for mass production and specific types of materials.
Other cutting tools: among these tools, we can refer to cnc laser machine or laser cutting machines, oxygen cutting machines, plasma cutting machines and waterjet cutting technology.
