Straw mortar as well as straw color is very easy to apply due to the fact that it is completely mixed and prepared in the workshop. Straw mortar:
Straw mortar is applied in the form of powder in a bag and cementing trowel, the same as cement, i.e. on all uneven surfaces such as brick, rough black cement (plaster), brick, etc. ...
Straw color:
Straw color in ready-made bucket packages with completely natural straw and a completely traditional appearance
on smooth surfaces such as plaster. Soft cement, paint, tile, stone, ceramic, wood, iron sheets, glass, varnish, etc. can be applied
How to apply the same color with a pen, roller, and pistol...
Fast execution And easy and low cost compared to the powder type...
Resistance of straw (straw-colored powder):
Both mortars are completely waterproof and resistant to rain, snow, cold, heat, and direct sunlight.
And both mortars are It has been prepared and manufactured by engineering..
A powder based on minerals, mineral additives and cement and straw is mixed and ready for use. And this makes it possible for the building to continue working safely without the stress of fast drying..
Straw paint based on glue, straw and special ingredients for flowers (fully prepared) with and without straw. The natural color of high-quality straw is prepared on a water base
but it is applied only with the necessary amount of diluted water and according to the instructions.
Tools needed to implement both mortars:
For powdered straw (cement trowel, Cao Chu trowel, Istanbul masonry trowel,...)
Ain cement execution _first stage
wetting under the work for better adhesion of the mortar,
second stage_after the mortar dries, sprinkling water in the form of rain Stabilization and hardening of the mortar for 2 days with low pressure and amount...
Necessary tools for applying straw color...
Painting brush or roller _if needed Even the pistol
is very quick and easy to use
it dries quickly after use and does not need any additives..
