Technical specifications of hydraulic elevator
It is natural to get detailed information about the technical specifications before implementing a hydraulic lift. Therefore, in this section, we provide you with information about the technical specifications of this type of elevator.
In general, this type of elevator has several simple parts, including the oil tank, control board, and power. The unit indicated for pumping the oil and the sensor.
When the movement command causes the elevator cabin to go up or down, the data sensor in this elevator determines the type of movement. Finally, adjusted forces are applied to the valves by the same data sensors located on each floor. Finally, it is the liquid pressure inside the cylinders that moves the piston. Since the cabin is mounted on a piston, it moves and moves. The mechanism of hydraulic elevators is so simple, but their technical specifications are as follows. It has an anti-theft system. > No need for a governor
There is no need to build an engine room for installation.
The possibility of using and running in low wells
Silent, smooth and fast movement
Optimum energy consumption
With a car sling for carrying the cabin
the possibility of using three-phase or single-phase electricity for elevator operation
with gear oil pump, vane pump and screw to make power unit