What is the use of fuse package?
It is better to provide you with information about the use of this fuse before we talk about the reasons for the package fuse burning. As you know, a fuse is a protective device that exists in all electrical devices and appliances, and its function is to protect the circuit of the device. A fuse is a conductive metal strip that is placed in a non-conductive housing and prevents the passage of electric current beyond the permissible limit. When the electric current exceeds the permissible value, the metal strip inside the fuse melts and the electric current does not reach the other part of the circuit.
The reasons for the fuse of the package
In this part of the article, we are going to check the cause of fuse package burning and setting the package flame together, if you have a wrench, you can solve the problem caused by your fuse package by reading this article.< /p>
❁ Completeness or failure of the package board relay
Relay board or amplifier is called a key, whose function is to receive additional current to help the package . According to the performance of this part, you must have noticed this issue, which is directly related to the amount of input power, if there is a malfunction in the relay board, you will see a malfunction in the device's fuse.
❁ A connection or malfunction in the motor valve
The motor valve is the electric actuator of the package whose task is to check the amount of fluid flow. Any problem in the motor valve can cause the fuse of the Bhutan wall water heater price package to burn. In order to solve the fuse problem in this case, you must first solve the problem of the motor valve.
Non-standard performance and disruption in the electrical protector
The electrical protector is a part in the package, which has the task of preventing electricity from entering the package with improper voltage. If the electric voltage entering the package is not standard, the electric protector prevents it from entering. If the electric protector has a problem and does not have the ability to prevent electric fluctuations, the fuse is damaged, and in this case, the fuse and the protector must be replaced or repaired. .
Circulation pump connection or failure
Circulation pump is a piece in the package, which is responsible for moving the fluids in the pipes. Often, this device is placed inside the fluids of the pipes so that the fluids move with more pressure in the pipes, also circulation prevents the wastage of water in the package. Failure or connection of this part leads to burning of the fuse package. The package is a fan, this part has the task of cooling the other parts of the package, the water heater does not heat up, and if the fan of the device malfunctions, the parts of the device get hot after working and damage the fuse. If the fuse is burnt, check the device's fan before checking other parts.
How can we understand which of these above are the main cause of fuse burning?
The simple solution is to remove each of the mentioned parts. It's important to start with the fuse test first because this is one of the easiest parts to test, but it's very effective at causing a blown fuse problem. Now how can this be done? For example, to check the power protector, first disconnect the power cord from the package, turn off the package, and plug the two plugs directly into the outlet.
Now it's time to turn on the device again, And see if the fuse still burns by disconnecting the power protector. If your fuse continues to work without problems, be sure that the problem is with the package's electrical protector and you should replace it. But if the fuse of your package burns again, be sure that another part other than the electric protector in the package is defective. In the same way, you should do the same method for the rest of the parts to finally find the main source of the fuse package burning problem.
Why the body of the package has a strong electricity?
This problem can also have many different causes, one of which can be a problem in the operation of the fuse. In addition, one of the other causes that can be pointed out is the malfunction or failure of one of the parts of the device, which can cause the package body to have electricity. Sometimes, even though there is no change in the performance quality of your package, and the device works just like before, the power of the body is already increased and sometimes it can even cause damage. In such a situation, our suggestion is to connect one end of the string to the nut of the gas inlet valve, and connect the other end to the body of the device. Most likely, after doing this, the problem of having electricity in the body will also be solved.
Very important point in burning the package fuse
Be sure to get a number of half-amp fuses before doing anything with electronics, and under no circumstances, if you don't have a fuse, do not attempt to fuse (not even with a single wire) otherwise, be sure that the control board is damaged as well. It definitely burns and must be replaced along with the desired part.
Steps to replace the burnt fuse in the package
Replacing the burnt fuse on the package is very simple and if you are a bit handy with a wrench, you can replace this part by yourself. So, to learn how to do the work, follow the steps below:
- Cut off the power of the package. For this purpose, disconnect the power plug of the device from the protector or the power outlet.
- Open the upper frame of the package board compartment by hand. This compartment is located right in front of the package and at the bottom.
- After opening the package board compartment, you can easily see the device board. With the help of a phase meter, first make sure that there is no current on the package board.
- The fuse of the package board is similar to a small glass bulb that is placed on the board. Apply a little pressure under the fuse with the tip of the phase meter to remove the fuse.
- Then remove the glass fuse of the package board by hand. If the glass housing of the fuse was black or the wire inside it was cut, make sure that the fuse is burnt.
- Get a fuse similar to the previous one from the market and put it in its place on the board. Note that if the fuse is in place, the installation work is finished and there is no need for soldering or wiring.