The repair of CNC cutting machine parts can be done due to breakdowns or the need for periodic repairs. In the following, I will explain the general methods for repairing parts of CNC cutting machine:
❥ Diagnosis of failure
First, failure or problem in the part must be diagnosed. This may be done by checking for signs of failure, checking the operation of the device, and using diagnostic tools such as testers and sensors.
❥ Part Repair
After Failure diagnosis, the defective part must be repaired. This may involve repairing, replacing or adjusting the part. In some cases, simple repairs may be required, such as compensating for a broken part, replacing the battery, or resetting the part's parameters. If the part is not possible or the part is completely damaged, it will be necessary to replace the part and use a new part. In this case, the new part must be replaced carefully and following the replacement instructions by experienced technicians.
❥ Adjustments and Adjustments
After repair or replacement The part may require device readjustments to ensure proper operation. This includes parameter setting, calibration and resetting of the control system and sensors.
❥ Testing and evaluation
After the part is repaired and the necessary adjustments are made, the device should be tested and evaluated. It includes the implementation of relevant tests and experiments to check the correct operation of the device after repair. The most important point in repairing CNC cutting machine parts is to have enough knowledge and experience in the field of the machine and its parts. It is better that relevant repairs are carried out by experienced technicians and official after-sales service companies. Periodic maintenance and repairs are also necessary to maintain the optimal performance of the CNC cutting machine. This includes replacing and adjusting parts such as batteries, lubricants, sensors, as well as cleaning and lubricating mechanical parts.
❥ Technical guidance and support
If It is difficult for you to repair the part or the CNC cutting machine, it is better to refer to the guidance and technical support of experienced technicians and manufacturing companies. They can guide you and provide the necessary solutions for repairing or replacing CNC cutting parts. ❥ Training and getting to know the machine is better CNC cutting machine users should be equipped with sufficient training and knowledge about the operation and simple repairs of machine parts. These trainings can include practical and theoretical training on CNC cutting machine parts, maintenance instructions, simple repair and troubleshooting instructions, as well as the use of educational resources such as books, videos and online resources.
❥ Regular maintenance
To avoid breakdowns and the need for major repairs, regular maintenance and following the manufacturer's maintenance instructions are very important. This includes cleaning the device, replacing consumable parts on time, lubrication, checking and adjusting parameters, and checking the device's performance in certain time intervals.
What is the main part of the CNC machine? And how does it work?
The main part of CNC cutting machine usually includes work table, spindle (head), motors, numerical control device and power control system.
Work table: Work table of CNC cutting machine It is the environment where the piece is placed. The work table usually has a smooth and solid surface on which the piece is placed, and by using the work table, the piece is placed in the right place for cutting and performing other operations. Spindle (lead) : Spindle or head is the part that moves the cutting tool in the machine with rotation. The spindle usually consists of a motor, a wrench and a cutting tool. The spindle motor acts as the power source for the rotation of the cutting tool and the wrench is used to keep the cutting tool in the right place.
Motors: The CNC cutting machine includes various motors that They are used to move parts and other components of the machine. Motors usually include X-axis, Y-axis, and Z-axis motors that control the movement of the piece in the horizontal (right and left), vertical (up and down), and vertical (forward and backward) directions, respectively.
< p> Numerical control device: Numerical control device (CNC Controller) is responsible for controlling the movements and operations of the CNC cutting machine. This device receives the programmed commands through the computer or input user interface and performs the desired movement and operation using control signals to the motors and other components of the device. Power control system: The power control system is responsible for supplying electricity and energy to the CNC cutting machine. This system includes power supplies, transformers, electrical circuits and other components that are needed to provide electrical energy. The power control system is used to supply and distribute power to the motors, spindle and other components of the CNC cutting machine.