How is the cementation of the building's facade?
How is the cementing of the facade of the building done?
To perform the cementing of the facade in the annealed facade cementing group, before starting, we must string the entire facade so that the entire facade is also executed with that busy and smooth string.
After stringing, you should wash the dust from the walls, (if there is dust, the mortar will not stick to the wall)
and you should definitely put a chicken net on all the concrete and iron surfaces to prevent possible cracks. For cementing on smooth surfaces, be sure to use concrete glue.
Now, it should be chromed on the wall in relation to the string, and the distance between these chromes should be about one meter.
After drying these chromes should be between Fill them with cement and sand mortar, and after filling the mortar between the chromes (shooting), it is time to pull the bar. As a result, the entire surface of the wall will be smooth and uniform.
Types of cementing
Plaster cementing: which is the main purpose of smoothing the wall and as below Soft cement: a mixture of stone powder and white cement is used in a ratio of 1 to 5, and the thickness that is stretched on the wall is 4 mm at most. Drain cement or clear water: before When applying this cement, the walls must be framed with glass or foam or studs, the minimum thickness of which is 1.5 cm. The required materials are sparkling powder, sand, and white cement, and after applying it with a trowel. They smooth its surface.
Washed cement: its execution method and materials are the same as water cement or smooth water, and the difference with water cement is that in washed cement, after troweling and before drying, the powder on the surface of the cement is mixed with water. It is washed and the aggregates under the work are identified. In terms of strength, it has high strength due to water absorption during implementation. Tagari cement: Tagari cement is sprayed on soft cement with a Tagari sprayer. Its materials are similar to soft cement. with the difference that concrete adhesive must be used inside this mortar.