What is Finger Juventus?
Finger joint is known as the most stable method of creating longitudinal connections between two pieces of solid wood or wood composite. Finger joint in Farsi language means finger joint and the reason for the name is due to the similarity of the finger joint to the fingers when holding each other. Finger joint is a type of joining wood panels to each other. Natural wood has many pores inside. which has water inside. Cracks that can be seen in wood over time; It is caused by the evaporation of water in wood. It is used to produce very long wooden components or to remove branches and cracks that reduce strength. Using finger joints, short pieces of wood can be connected to an infinitely long string of wood.
It is produced using a longitudinal joint with high initial force (self-clamping), which is then always glued. As a result of the fixed intersection between the two connected parts, it also has a high bending strength. These features mean it is superior to steel-to-wood joints as well as other wood-to-wood joints. Due to the ideal conditions in terms of production and quality assurance, finger joint components can achieve almost the same strength as components grown in one piece.
You can use any wood to make finger joint plates. Some manufacturers even use a combination of several woods to make the board. In Iran, finger joint panels are sold from beech, sapli, oak, walnut, iroko, pine, acacia, etc. Some of these plates are imported and others are produced in Iran.
Both sides of the selected wood are combed, in the sense that they create finger-like hollow grooves using a device, so that the two pieces of wood, with a finger joint, are completely interlocked and fixed. become Note that the depth of the grooves can depend on the length of the wood. By placing the sticks together, a uniform surface is created and the wooden pieces are stuck together one by one through wood glue.
For this purpose, a connection device is used, these devices can completely fix the parts automatically or manually, and finally, the parts are glued together using a press machine. At the end of the work, to have a smooth surface, a grater and sandpaper are used to remove any bumps and roughness. With the slightest flaw, the parts will not fit together well, so the method of joining wood with machines is better than manual.
What are the features of the Finger Joinet pages?
Wooden panels that are made using the finger joint method have distinctive features that we describe below: 1- 100% natural wood is used in its construction. 2- It is fully compatible with sanitary environments such as the kitchen. 3- They are very resistant to water penetration and humid environments. 4- There is little noise when objects collide. 5- It has a very high resistance against cracks and stabbing. 6- The wood is beautiful and has a good warm texture.
What are the uses of Finger Jointe pages?
☑️ It is used in making cabinet panels
☑️ Finger joint is used as wall covering and floor covering.
☑️ Finger joints are used to make doors and stairs.
☑️ Finger joints are used to make tables, chairs, wardrobes, etc.
☑️ Finger joints are also used in inlay work.
☑️ decorative dishes with finger joint
