Construction of sauna jacuzzi boiler
? Manufacture of zero to 100 jacuzzi sauna pools, cold water ponds, air conditioning
? Pool Supplies
? Sales, Implementation, Consultation and Design
? Design and run your zero to one hundred pools and have a different experience from the pool
? Implementation of Pool Reinforcement First Network
? Implementation of pipes for the filtration circuit on the reinforcement network
? Complete Reinforcement Bowl Pool
? Perform molding and concrete
? Sealing and isolation
? Implementation of joinery
? Pool and Jacuzzi is one of the things that requires its own specialties. Both about design and implementation. The profession contains specific details that other engineers may not pay attention to. Boyiler Technical and Engineering Group pursues this profession as a specialized profession and is proud to perform pool projects in engineering.
Tips on pool construction
a liter of weight equals approximately one kilo. For example, a 3 -in -4 pool with a depth of 1.5 meters 18 cubic meters of water is 18 cubic meters of 18 tons. The pool is permitted only from one part of the water to be reduced either from the surface of the pool or in other words surface evaporation. The walls and floors of the pool should not even have a very small way to exit water. The Boiler Engineering Technical Group with more than 15 years of experience is proud to build the largest home pools in the area and to build the pool.
Before what the pools are about the appropriate skimmer, let's know how to do the skimmers:
Skimmers are separate output routes that are alternately around the pool. Although the inlet of the skimmers is also the surface of the water in the pool, the skimmer basket is located below the pool water surface. The baskets in the skimmer boxes collect leaves and other large junk that may disrupt the purification system. Bazles that, if not cleaned every time, can disrupt the junk operation. Skimmers in which leaves, grass, and junk are stuck, causing the pool water to quickly cloudy, as they interrupt the water flow to the filters.
in the skimmers use barriers or valves that create one -way current in the skimmer, and this part is essential. Because when the junk enters the skimmer basket, these valves prevent them from returning to the pool.
What is the right skimmer?
Usually skimmers are placed every 2 to 5 square meters from the water level or approximately six meters away.
Skimmer is suitable for small pools but recommended for large public pools and race pools, surface networks. In general, the Skimmer system is not permitted for pools that are wider than 2 square meters.
Skimmers should be designed to allow 2 gallons per minute (1.5 cubic meters per hour) water to direct floating material on the water surface to the filtration system.
