Fiberbury
Fiber cement putty is the first fiber cement polymer powder putty that is exclusively produced by Ayman Sazan Company in Iran. Fiber cement putty is a cement-based powder putty with water solvent, which has improved its properties and adhesion by combining polymer materials with water retainer, improver and nano additives.
This putty is applied in the form of one or more thin layers with a maximum thickness of 1.5 mm on the interior and exterior fiber cement surfaces. After combining the above putty powder with water at a ratio of 3 to 1 and mixing it by hand or with industrial color mixers, a smooth paste is obtained without any roughness, which can be smoothed with a special trowel, spatula or trowel. The working surface of spreading and finishing the polymer fiber cement putty can be applied on all cement, concrete surfaces, all types of autoclaved and non-autoclaved light blocks (Heplex-AAC-Siporex) as well as wall sealing with fiber cement or cement coating or walls Covered with gypsum boards and leaf plaster, the biggest advantage of fiber cement putty is that it can be used for all weather conditions, such as hot and dry weather, hot and humid weather, cold weather, and moderate and harsh weather. is.
Another characteristic of fiber cement putty is the homogeneity of the particle spectrum, which after mixing produces a soft paste without any roughness, which creates a completely smooth surface for final painting. Also, the paste prepared with fiber cement putty can be used in environments with a temperature range of 5 to 45 degrees Celsius. It is resistant to any moisture.
Product Properties:
Fiber cement putty is packed dry
Due to the use of high-quality polymer glue, it has the ability to work seamlessly up to a thickness of 1.5 mm in one step
Fiber cement putty only needs to be mixed with water to prepare
Fiber cement putty is in powder form and made on the basis of mineral powder (filler), cement and strengthening materials, which can be used as a surface putty and sealant along with a special polymer adhesive.
Fiber cement putty is produced in one type of granulation
After puttying, the surface of the putty is completely smooth and smooth
Speed in preparation
No smell and no sensitivity
The ability to match the color with the final color layer (adding pigment)
Base color white and gray putty
No need for paint, putty oil, thinner and other solvents to prepare
Surface drying up to one hour after application
Final fixing and hardening of the putty, ten days after implementation
Compatible with epoxy, oil, acrylic, plastic and construction facades and Kinitex paints
After the putty is applied and dried, the putty does not swell, peel or separate from the work surface
Double coverage compared to traditional putty
High execution speed
Implementation Instructions:
Fiber cement putty should be mixed with water in a ratio of 3 to 1. (3 cups of fiber cement putty + one cup of water) Add fiber cement putty to water, then mix it well for 2 to 3 minutes with the hands and feet of an industrial color mixer. The putty mixture can be used for 1 to 2 hours after construction, depending on the ambient temperature