Advantages of fiber cement putty

This product is a cement-based putty that has increased its adhesion and efficiency by adding polymer materials. This putty is used in the form of one or more thin layers with a thickness of 1.5 mm to be used as the final layer of the surface of the external wall, internal wall and ceiling.

Fiber cement putty is used on all cement, plaster, concrete surfaces, types of autoclave light blocks and also for sealing fiber cement walls and Kenaf walls.

This putty is applied in the form of one or more thin layers with a maximum thickness of 1.5 mm on fiber cement surfaces. After combining the above putty powder with water at a ratio of 3 to 1 and mixing it by hand or with industrial paint mixers, a one-hand paste without any protrusions is obtained, which can be smoothed with a special trowel, trowel, or spatula. The working surface of fiber cement putty can be used on all cement and concrete surfaces, all types of autoclave and non-autoclave blocks, as well as the sealing of walls covered with fiber cement or cement board or walls covered with plaster and gypsum sheets. The biggest advantage of putty is The specialty of fiber cement is that it can be used for all weather conditions, such as hot and dry weather, hot and humid weather, cold weather and mild and harsh weather.

This putty is packed dry. It only needs to be mixed with water to prepare. It is in powder form and made on the basis of mineral powder (filler), cement and strengthening materials, which can be used as a surface putty and sealant along with a special polymer adhesive. After puttying, the surface of the putty is completely smooth and even. Speed ​​in preparation. No smell and no sensitivity The ability to match the color with the final color layer White and gray putty base. No need for paint, putty oil, thinner and other solvents. Surface drying up to one hour after application. After puttying and drying, the putty does not swell or peel in any way. Double coverage compared to other putty.