☑️ Cylinder
There are various methods for the preparation and baking of plastic materials, one of which is for the preparation of cylinder-mardon granules. Cylinders and spindles are widely used in all kinds of machines in the plastic industry, spiral cylinders and spindles make it possible to obtain a uniform production of high quality. Spirals are one of the types of material transfer systems. The polymer materials inside the device are melted with indirect heat and gradually become a molten paste, the molten materials are moving inside the machine and finally it is ready to be formed to leave the cylinder.
☑️ Mardon Cylinder Design Type
The type of electroplating of these parts, the type of cylinder and Mardon all have fundamental differences. Another important point is the length of the mardon to its diameter, which is known as L/D, which depends on the polymer materials and the final product. The Mardon cylinder of the nylon production line, like the spiral cylinder, is an important part of all recycling devices, the design of which also depends on the polymer material and the product.
Mardon cylinder is an integral part of the plastic recycling machine. One of the parts of the plastic injection machine is the Mardon cylinder, which finally delivers the raw materials in the form of granules or powder. The task of Mardon is to mix and advance the polymer material in the cylinder and melt it. Biaxial cylinder is mostly used in p-pvc, granule, nylon, nylon, inflatable production line. Cylinder Mardon has a special design for various polymer materials. For each of the above cases, the design, the type of material of the Mardon cylinder, its shape and the plating of the parts are different, because the design of the Mardon cylinder is directly related to polymer materials.
☑️ Using the Mardon cylinder
There are different types of conveyors and material conveyors in different diameters and lengths.
The Mardon cylinder is the heart of an extruder device and is a common part in all extruders. It is widely used in the plastic industry, granulation, nylon, polyethylene, and plastic injection devices.
The cylinder is a cylindrical steel piece that is used for mixing polymer materials and also for baking plastic materials in the production industry. In fact, the cylinder is a part of the spiral holder, and the heat transfer to polymer materials for melting is mostly done through the cylinder, and the spirals are also the main part of the cylinder. The spiral causes the molten materials to be pushed forward and mixed and melted at the same time. The Mardon cylinder is made up of several parts and is made in different types according to the manufactured product, and the design of the Mardon cylinder depends on the type of polymer material.
