Stone crushing machines are one of the natural wealth of any country, the minerals present in it, which provide the basic materials needed by other industries to make practical and daily life items. Minerals that are located near the surface of the earth are extracted from the earth with the help of open pit mining method and minerals that are located deep in the earth are extracted from the earth by underground mining method. After the minerals are taken out of the earth, special operations such as crushing by various industrial stone crushing machines must be performed on them so that they are ready to be used in other industries. To go through it is to be in the narrow lines. Crushing lines consist of various stone crushers that are responsible for crushing minerals into smaller pieces. Stones show different behaviors when crushed, one of them is powdered and the other one is not easily shrunk due to its high hardness.
Choosing a stone crusher is not easy to do and must be very careful. to be The most important thing to consider when choosing a stone crusher is the type of material that should be extracted by this device and the maximum size of stone that can be placed in this device because the device must have the power to break this size of stone and break it into pieces. make it smaller Also, the quality and brand of the stone crusher and its lifespan are also very important because in some companies it is necessary to convert a large amount of stones into smaller pieces during the day, and the quality of the stone crusher and its capacity should also be considered in order to be able to process that amount of stone. Of course, sometimes this work is not economical and causes serious damage to the device, so in mines, this should be done with a moderate ratio so as not to put too much pressure on the device.
How many categories are industrial crushers?
Types of stone crushers are divided into three categories, primary stone crushers, secondary stone crushers and tertiary stone crushers, depending on where they are located in the production line. Primary stone crushers are placed at the beginning of the way of crushing stones and have the ability to reduce all kinds of stones, such as jaw crusher and hydrocon. After the stones are shrunk by the primary crusher, they enter the second stage of crushing and are made smaller by the secondary crushers. If the size of the stones is still large, another stage is added in the production lines, which are often used in sand production factories. In the third stage, the stones from the secondary crushers enter the sand makers and are turned into very small pieces.
Types of crusher
Jaw crusher
In mineral processing lines, the first crusher that is placed is the jaw crusher. This stone crusher has the ability to crush stones with a high degree of hardness, and despite its very strong body, it does not need to be repaired easily. Inside the jaw crusher, there are two fixed and movable jaws, and the stones are turned into small pieces by being placed between these two jaws and with the pressure caused by their movement.
Qubit stone crusher< /b>
Another widely used industrial stone crusher is Qubit stone crusher, which is also known as impact stone crusher. The process of crushing stones in this device is done with the help of incoming blows from the side of hammers, and for this reason, it has been given the name Qubit stone crusher. The stones crushed by the jaw crusher are sent to the qubit crusher to reduce their size. Secondary production lines are used and have the ability to crush very hard stones. The miniaturization of minerals in the Hydrocon crusher is done by closing the gap between the mantel and the cone and the automatic lubrication system has extended the life of its parts. Hydrocon crusher parts are made of manganese steel with molybdenum and will have a very high resistance to all kinds of blows.