Looking at our surroundings, we realize that a huge part of our surroundings is made up of building facades. If we pay attention to these views, we will realize that some of them are very beautiful and some of them do not have the expected beauty and desirability. This is because, despite the fact that a lot of money was spent on the facade of this building, its builder did not have enough knowledge, or in other words, the builder was ignorant in this field. In order to create a beautiful and high-quality building facade, we must act based on structural instructions and observe architectural tips. In the following article, we are going to give explanations about the important points in brick building facades; So stay with us.
When building facades with stone, brick, glass facades, etc., you must observe the following points:
1- Before starting facade painting, the bottom surface should be cleaned and completely cleaned of any contamination such as dust, dandruff, metal rust, etc.
2- Before walking. To build a brick facade, sanding must be done first to prevent the absorption of mortar water by the brick. Also, the brick must be free of any cracks, dandruff, etc. 4- Anti-sulfate cement must be used in the construction of concrete, cement and/or brick facades to prevent damage and destruction of the facade. .
5- In order to prevent the penetration of water and moisture into the front wall and its lower wall, the strapping operation must be done properly and properly using fine-grained and high-quality mortar.
6- To create a facade of a stone building, a stone should be used that has high resistance against freezing and unfavorable atmospheric and environmental conditions. It should also be free of any cracks etc.
7- Before the execution of the facade, its lower surface must be prepared, which depends on the type of facade that is to be executed. The surface under the facade should be pre-stretched, wormed, polished, scratched or grooved, and if necessary, a wire mesh or chicken net should be installed. made it smooth and uniform and no smoothness or unevenness remained on it.
