Reasons for the importance of facilities in the building reconstruction process
Reduce costs
If you take care of the facilities with special care and attention during the renovation, your costs will be greatly reduced. Because you will no longer need to rebuild or repair them, and you can use the same equipment properly.
Reconciliation time
If you check the condition of the facilities properly before renovating the building, the time required for the repairs will be reduced. Because you can predict all the necessary things before any action and take care of them at the right time.
Reducing the possibility of risks of life
The importance of facilities in building renovation does not end only in reducing time or costs. By doing this, the security of the project will also increase. Because you can take good care of them and prevent various accidents by identifying the location of gas pipes or electric wires during destruction.
Important Tips on Facilities in Building Reconstruction
In order to be able to properly take care of the facility during repairs and renovations, there are some things to keep in mind.
1- Checking the facility before performing the reconstruction process
The first thing that is done during building renovation in Tehran is to check the facilities and their health. Before doing any work, the contractor must check things like water and gas pipes, valves and their connections, sanitary facilities and electrical wiring from a qualitative point of view. In this way, if there is a need to renovate any of these parts, they can be taken into account when estimating the costs of rebuilding the building.
2- Specify the location of the facility
In order to be able to protect yourself and the workers during the demolition or installation of various connections, you must determine the location of the installation with a special sign. In particular, the electric wires that are installed as a built-in or the water, sewage and gas pipes that are placed inside the walls and the floor should be carefully identified in order to avoid any problems.
3- Collect or cut off facilities
One of the important actions that you should do when renovating a building in Tehran is to cut or collect things like electrical wires. Especially if you intend to destroy a part, it is very important to collect these wires carefully and obsessively.
4- The health control of the facility after completing the process
In order to make sure that you have done the building renovation process correctly, you should check the health of the facilities after completing each step. Make sure that you never postpone this work until the restoration is completely finished; Because this issue can nullify all the work you have done and make you need to spend extra money to investigate the origin of the problem or solve it.
5. Control of heating and cooling systems
Another important part of the facilities in the renovation of the building is the heating and cooling systems, which must be properly taken care of. Systems such as splits or air conditioners are damaged due to dust. For this reason, you should definitely prevent dust from entering these devices by using appropriate covers or, if possible, move them to another place until the repair process is completed.
6. Use temporary facilities
Another important thing about facilities in building renovation is the use of temporary equipment. For example, instead of using the building's main gas, it is suggested to use a temporary gas stove so that there is no problem with temporarily cutting off the main gas supply. You can also use electric motors to start your lighting or appliances so that you don't run into problems during the project. The advantage of using these temporary devices is that you can easily use them anywhere and create the required heat or lighting in any space.
Which facility should be cut off before rebuilding the building?
If possible, you should cut off the gas and electricity from the main block so as not to cause any problems. But if this is not possible, make sure that you have correctly marked and collected all the facilities related to water, electricity and gas such as water, radiator water, kitchen gas and electricity in different parts of the building.
Is it possible to change the location of the facility at the time of reconstruction?
Yes. You can change the location of the facility depending on the new map drawn for the building. But you must be careful to insulate the place of all the previous installations well and for the new installations, while using high-quality raw materials, fully observe the installation principles.
