Rabbits, which may also be known as rabits, are steel mesh sheets that are used to create false ceilings of the Rabbits type. These sheets are usually galvanized. Its networks are called springs and have different shapes, including circles and rhombuses. In addition to the sheet, Rabits Kari rebar is also used in the implementation of this type of roof.
What is Robitz Rebar?
Rebar Rabits Kari should be selected according to the characteristics of the desired roof. But the most important point that you should keep in mind is the grade of the Rabbits' rebar. In this process, A1 or simple rebars are usually used. These rebars have good bending and weldability due to their mechanical, chemical and physical properties.
On the other hand, grade A2 ribbed rebars are weldable; But it is better not to run this process on them. A3 rebars are also not very suitable for bending with large angles. Therefore, plain rebar is superior in this respect.
On the other hand, ribbed rebars are more suitable for mixing with concrete. The tread of these steel sections creates more adhesion with concrete and increases the strength of reinforced concrete. Therefore, since we don't need this feature in Rabbits roof, then using simple rebar will be a better and more affordable option. But the next point is the right size for the work rabits bar.
Robitz Rebar Size
The most common sizes that are used for the work of Rabbits are the size 8 and 10 products. Experts recommend that the minimum size of the rebar used is 8. These sections must be able to bear the weight of the structure. Therefore, choosing the size of the rabbits rebar should be done according to the design of the false ceiling and its weight. In general, size 10 simple rebar is a common option for this type of roof.
What is the distance between the rebar in Robitz?
As it was said, the work of implementing the false ceiling starts with the installation of the rabits bar. To install these sections, the distance of the rebars is very important. The greater the distance between the bars, the lower the tolerance of the roof against the pressures caused by the materials. Or the dimensions of the false ceiling are large, it is better to reduce the distance of the bars. Usually, this distance should not be more than 60 cm. For large ceilings with special and heavy designs, this distance is reduced to 30 cm.
What is the difference between Robitz Rodes from the usual bars in the market?
As mentioned, the usual rebars in the execution of the false ceiling of Rabbits are more of the simple type or A1 grade. In terms of size, 8 and 10 samples are more common. Meanwhile, the rebars used in construction and construction projects are mostly ribbed and grade A3.
In terms of size, there are products with a cross section of 12, 14, 16 and 18 mm in Construction of various buildings are more useful. Of course, A2 and A3 grade rebars may still be used in the Rabbits roof. This issue and the final choice of the type of Rabits work rebar depends on the opinion of the master craftsman and the project manager.