Simple and practical polyethylene drip irrigation connections, all of which can be assembled, installed and operated easily and without special tools at high speed. Drip irrigation pipes and fittings are so simple that even with very little expertise, with some practice, plumbing can be done. It is enough to spend a little taste and a small investment. It will be compensated soon so that we can prevent excessive use of water and have a green and fresh garden.
Dropping the size of the drip fittings
Using the drip irrigation system, we can have a field or trees full of crops. Drip irrigation connections are mainly 16 mm in size, including knee, three-way, connector, initial connection of 16 mm pipe, primary washer, tip-to-tip connection, etc.
Drip irrigation connections and poly connections. Ethylene is very simple, cheap, light and economical. If the use of drip connections becomes common among farmers, it will greatly help to save water consumption.
The Importance of using irrigation fittings:
A drip irrigation system is unique due to the effective use of water and power for agronomic, agrotechnical and economic benefits. The drip system consumes only half of the water required for rain or surface irrigation. The means of water entering the soil is called "dropper".
Drippers reduce the pressure in the pipe network through a narrow nozzle or a long flow path and reduce the discharge flow to about 4 or 8 liters. They are on the clock.
Water saving
By using drip irrigation connections, saving the amount of water and the costs of drip irrigation reduces the operating costs, and this is the basic issue in this new method. Drip systems require less water than other common irrigation systems. For example, in gardens of young trees, irrigation with a drip system consumes only half of the water required by rain or surface irrigation. As the trees get older, water saving with the drip system decreases. For many gardeners, effective irrigation with the drip system is still important due to the scarcity and high price of water.
The labor cost for irrigation is Power can be reduced, because in the drip system, it is enough to set the water distribution and start the system. These adjustments are made by automatic devices that do not require many workers.
Benefits of Polyethylene drip irrigation fittings:
- Dawye Ziyad Bray Sahul Dar Kar
- Roche contacts with a Saad's Car Shaden
- Resistant Der Berrap Rabbat and Pousa الما
- Daraya Amad Toulan
