10 pieces used in office chair and how to replace them
How to repair the office chair is very important. Usually, all office chairs and furniture need to be repaired and replaced after some time of use. By properly repairing them, you can increase the life of the chair while maintaining its beauty, and instead of spending a lot of money to buy the chair again, you can use it for a few more years. Some parts of the seat usually break down faster than others and need to be repaired. If you want to learn more about the most important parts used in office chairs and their replacement, stay with us until the end.
1- Office Seat Mechanism
The mechanism is one of the most important parts that exist in all types of office chairs and is examined during chair repair. According to the type of chair, its mechanism can be single-purpose or multi-purpose so that users can adjust the position and height of the chair according to their conditions. The mechanism of the seat itself has different types that we will introduce below.
- Permanent contact mechanism that only adjusts the back of the chair.
- The harmonious mechanism that adjusts the back and back of the chair at the same time.
- The weight control mechanism is used to increase or decrease the resistance of the seat and cause the user back to the back of his arm.
- Backup Backup Mechanism is suitable for users who sit and use long hours at the table.
- The office seat mechanism can be easily replaced after removing the back and insole of the seat.
1- Base of Office Seat
The base of the chair causes it to move and usually most office chairs have 5 seats. The seat base can be made of polypropylene, steel or aluminum. The chair base is connected to the end of the chair jack, and in most cases, the jack must be replaced to repair the office chair base.
1- Office Seat Jack
If the seat jack is not of first-class quality, it will quickly break. Replacing office chair jacks is usually expensive. Therefore, we advise you to make sure to check the quality of the jack and the guarantee of those reliable ones when buying a chair. The main use of the jack in the seats is to raise and lower them, and the gas in it causes this to happen. Users can adjust the height of the seat with the help of a jack.
1- Office Chair Wheel
The wheel is another important part of the office chair that needs repair sooner than other parts. Chair wheels can be soft wheels, hard wheels or twin wheels. The wheels are attached to the seat bases and it is very convenient to replace them when repairing the seat. Usually, the wheels lose their smoothness due to piles of carpets, rugs, or garbage getting into them, and they are difficult to move, or sometimes they need to be replaced due to poor quality material.
1- Behind the Office Seat Season
In order to standardize office chairs, the back of the head is designed for them, and it causes less pressure on the back and neck of the user. Cold or warm foam is used on the back of the chair, which may need to be replaced after a while or the cover may be damaged. Usually, chair repairmen repair such cases in the workshop using foam, cover, scissors and special stapler.
1- Office chair handle
If you pay attention to how to repair an office chair, it is easily possible to separate the chair handles by unscrewing them. There are different types of chair handles, including ring handles, T-shaped handles, and removable handles, some of which can be adjusted.
1- Office Seat Jack Cover
When replacing the office chair jack, sometimes its cover will actually need to be replaced, and the jack is not a problem. The function of this cover is to protect the jack against damage and dust, and if it is torn, it creates an inappropriate appearance for the chair.
1- Insole or Living of Office Seat
The floor or sitting part of the office chair is one of the most important parts that is usually replaced in the repair of the chair. The foam used in this part, which can be cold or warm, according to its quality, after a period of regular use, the chair loses its original volume and needs to be repaired, which must be done by removing the seat cover. replaced.
1- Seat cover
The seat cover is used on the seat and back and can be made of leather, nano fabric, anti-perspirant, etc., which may get torn or damaged due to scratches or hitting a sharp object.
1- Backup of Office Seat
The lumbar support is similar to the back of the office chair, the height of which can be adjusted according to the user and reduces pain and neck pressure.
