What is the hemp?
Knaf is a kind of plaster coated plate which is considered as the new generation of plaster and knaf ceiling is considered as one of the best type of roofs in interior design and decoration, all the construction works that could be done with plaster and some other materials in the past. With Kenaf, you can get a series of new benefits such as higher work speed, greater variety in design, the possibility of working on the ceiling and decor in a shallow depth like 4 cm, and an excellent combination with all kinds of decorative and original lights. It is produced in the form of 120 x 240 panels, which are produced in different thicknesses and types of panels (depending on your use in normal environments, humidity, heat, facade, etc.) and today it is one of the most important building elements. It is remembered.
Kenaf is a German product and is one of the most widely used materials for ceilings, decorations and separating partitions worldwide, which includes two general parts and two partial parts.
1- Stucco panel and Kenaf structure as the main parts
2- Screws, nails and seasoning, spectrum and Kenaf putty as a supplement
The roof of the cannabis
Kanaf roof is considered as the best type of roof for homes and offices, by using the Kenaf roof, you can hide the dents and fractures in the heart of the work so that the environment looks more unified. Modern and minimal style, which is very popular. and they are attractive and knaf is one of its most important materials and gives it a special beauty with its integrity.
Benefits of cannabis
1- The roofs and partition walls of Kenaf are integral galvanized metal structures (variable depending on the type of work) on which plaster-coated plates are screwed and the seam between the Kenaf panels is filled with putty mesh. and smooth surfaces have been created that can be painted, papered or covered with other materials.
2- Kenafi walls are about ten times lighter compared to traditional and old walls. Therefore, by reducing the dead load of the building, the impact of the earthquake force on the building will be much less, and in case of destruction of the building during the earthquake, due to the lightness and integrity of the Kenaf system, the risk of life for the residents will be significantly less.
3- In addition to the lightness of the decorative knaf, the way of connecting and flexibility of the panels to the structures is also such that it reduces the force of the earthquake. In such a way that the masters (structures that are placed horizontally on the floor of the wall) have a place to play inside the runners (vertical structures that are placed inside the master or the state) and are not screwed or riveted together, but the panels are Both of them are screwed
4- High variety of design and implementation, so that if you have a professional installer, there is no plan that cannot be implemented with knaf, similarly, simple ceilings suitable for minimal style will have their own charms with knaf.
5- The possibility of combining it with all materials and in different conditions, you can prepare a special panel and cover the panel with paint, wood, wallpaper , PVC, deco walls and other types of materials combine with renovation and increase the beauty of the environment.
Gypsum
Knaf plasterboards have different types, most of them are produced in 120 x 240 cm size. Ordinary plasterboard or RG, which is used in most projects and its thickness is offered in two models of 9 mil and 12 mil in Iran, which is 9 mil for ceiling and curved decorations and 12 mil for walls and partitions. And the parts where more resistance is needed are used. Aqua Panel, which is considered a Knaf cement panel, uses cement instead of plaster, and has good impact resistance and moisture resistance, and has a higher price than other panels. FR fireproof plasterboards, which have good resistance to heat and heat, are used in security environments or environments where a large number of people travel. MR anti-moisture panels, which are mostly used for toilets and bathrooms and parts that are in contact with water. Konaf panels are mostly soundproof to some extent, and the family of 60 x 60 tiles are considered Kenaf products.
Tips on the implementation of the roof and walls
Various issues must be observed in the implementation of a principled kenaf:
Correct carrying of panels to the environment without hitting and absorbing moisture, correct use of panels in different parts, use of structures at most every 60 cm under the panels, use of self-tapping structures and screws, full installation equipment Especially laser leveling, screwing the panel to the structure every 15 cm, using the correct structures in the implementation, using integrated panels so that the grooves of the Knaf spectrum are in the path of each other, using gloves for environments where the depth is more than They are 15 cm and...
Kenaf panels have a slight depression along their length, which is the location of the spectrum (Kenaf net or sealing tape), which helps the painter to completely cover the place of the screws and integrate the panels after the foundation.
Another important thing is when you want to install your TV or chandelier on the Kenaf.
You must make sure that the Kenaf installer has built the necessary structures for greater resistance behind the Kenaf panel and that 12-mil Kenaf panels must be used in these areas.
Considering the counterfeit goods in the market, make sure that your operator uses the original Kenaf material so that your work health is maintained over time.
Implementation of Cannabi Decor
One of the most important parts that can be created with kenaf is wall decorations.
These decorations have different functions and you can combine them with other interior decoration materials.
At first, it is important that the 3D design is done for you by the architect so that you can see its finalization before implementing the decor.
The decor should be created according to the design style of the elegant environment with a depth of less than 7 cm on the wall.
Work the roof of the roof
It is often seen that they work on knaf plastering tools or just change the living room with knaf ceiling. This is very wrong, if you want to have a completely professional and harmonious environment, you must do the work properly. First, you need to remove old plasters and tools from the environment, and after the infrastructure, you can integrate Kenaf in your environment, each environment can be personalized through the ceiling and define the definition of each space. You must have a suitable design for different parts that are different in appearance while coordinating the overall work of different parts. The more integrated your design is, the more open and modern your work will be, and it is recommended that you paint your ceiling white except in special cases in environments with special uses, and do not neglect the importance of lighting and a light for the ceiling. And consider your decor to have two sides. The first part provides you with the most similar lighting to natural light at different levels, and the second part adds beauty to your work and increases the attractiveness of your work with attractive lights.
