Importance
The presence of air in the pipes and connections of wall heating packages gradually causes wear and corrosion of these parts and accessories. On the other hand, in addition to causing problems in the proper functioning of the package, failure to ventilate the device's pump will result in failure and malfunction. Also, failure to pay attention to the ventilation of the wall-mounted package will cause noise in the connections and pipes. The package and lack of heat generation and optimal heating in the environment are accompanied. In this context, it should be noted that the best time to ventilate package devices is influenced by parameters such as the duration and history of using the device, the height of the building from the ground, and the brand and model of the product.
The benefits of wall package ventilation
Disappearance of extra and unusual noises in the pipes, adjusting the water pressure, solving the problems of not heating the package water, distributing warm, comfortable and uniform air in the environment and improving the efficiency and productivity of the device, are among the most important advantages of the process Airing is considered a package.
It should be said that airing heating equipment such as a package is in the concept of releasing excess air in the pipes and pump of the device. Carrying out this process in an appropriate time frame and correctly is considered one of the best ways to reduce and optimize energy consumption and increase the lifespan of the device. Also, people living in the upper floors of the building, due to The low pressure in the pipes of heaters and radiators, it is possible that more than the people of the lower floors need to carry out airing of the package.
Wallpaper Wallpaper Training
With the beginning of the cold season, airing the package is one of the necessary and practical measures to protect and maintain the device. Ventilation of the wall package consists of various steps and is done from the pump part and by means of a special screw for ventilation. In this section, we will examine the steps of ventilation in wall packages:
First step: In the first step, the hot water tap should be left open so that the pump starts working while the package is turned on.
Second step: b> A large dry towel is placed under the pump. This method prevents the surrounding environment from getting wet by the pump's output water. Third step: Examine the end of the pump to find the screw for ventilation of the device. Often, the screw related to the ventilation according to the manufacturer's brand and type is installed in the end part of the pump. Fourth step: From the ventilation steps, the package must be suitable for the type of screw, tool and screw. He chose a suitable meat and opened the corresponding screw from the pump. By opening the venting screw, the air and water inside the pump are discharged. Normally, the air vent screw of the device is turned counter-clockwise.
Step five: After emptying the air from the pump, put the air vent screw in its place and using The screwdriver becomes tight. At this point, the opened screw is closed clockwise. It goes without saying that when the air is released, the abnormal sound will gradually disappear with the complete evacuation of the air.
Note: When opening the vent screw, the water discharged from the wall package pump is very hot. Therefore, in order to prevent burns, you should protect your hands and body. Also, the ventilation of the wall package, especially the pump, while reducing the noise of the device, helps to make the temperature of the spa uniform.
چگونه رادیاتور و شوفاژ را هواگیری کنیم؟
If you hear the sound of rushing water in finned heating radiators or a rattling sound in panel radiators, it becomes more necessary to ventilate the radiator and heating. He turned off the heater. Because turning on the device increases the air inside the radiator.
There is often a screw installed in the upper part of the radiators, which should be opened using pliers or a screwdriver in order to remove the excess air. At this stage, the radiator ventilation screw should be turned counter-clockwise. Also, before venting, a suitable bucket or container should be placed under the radiator valve.
In the continuation of the venting process, open the corresponding screw slowly and slowly until the high water pressure causes it to be thrown away. If the radiator has not been ventilated for a long time, an unpleasant smell and yellow water will come out of the device. The process of airing the radiator should be continued until the noise or bubbling stops. After the sound stops, close the ventilation screw tightly clockwise and clean around it with a clean and dry cloth. After these steps, the ventilation process of the heating radiator ends