Hablex blocks are among the construction materials that are widely used in the construction of buildings today. Due to the materials used in them, these blocks have been classified as environmentally friendly materials; Because they have not used the harmful substances of nature in them. Heplex glue is used to connect the blocks. The advantages of Hablex adhesive are many and distinguish it from other common cement block bonding mortars.
Sand and cement mortar have been used for many decades to connect blocks. But this mortar is not practical for Heplex blocks, and the reason is that it is too heavy for ACC blocks and does not have the thermal insulation properties of ACC blocks; Therefore, a special glue is used for these blocks. In this article, we have described the advantages of Hablex glue, which can be very useful for you.
What is Hoblex Block glue?
The glue or mortar used for Heblex block has a special formula and different materials from ordinary mortar. This glue is made of sand, cement, lime and specialized polymers. Some companies also use fly ash in it, which is one of the components of Heblex block.
Compared to ordinary mortar, this adhesive creates less thickness and reduces the thickness of 8-12 mm to 3-4 mm. This glue is more sticky than regular mortar and can be used by adding a certain amount of water.
Benefits of Hoblex glue
We need to use its own special mortar to fasten the Hablex blocks on top of each other. Hablex glue is made with a different and special formula and is completely economical. The amount of use of this mortar will be less than the usual sand and cement mortars, so it costs less for us. In this section, we want to describe all the advantages of Hablex mortar.
Fiber
Joints that require 8-12 mm of ordinary cement-sand mortar are well connected with only 3-4 mm of Heplex mortar; Therefore, the need for mortar is reduced by 75%, which means less cost and of course a cleaner and more delicate connection.
More required mortar
Compared to ordinary mortar, less Hablex glue is needed to connect the same wall. This means that the amount of Hablex glue used will be less than that of ordinary mortar. When less mortar is used for construction and joints, other benefits follow, including: smaller storage space, lower transportation costs, and less labor.
Faster construction
One of the most basic advantages of Hablex glue is the increase in the speed of building construction. ACC block glue is a ready-made material that only needs a little water to use, but to make cement-sand mortar, the materials used must be properly proportioned and none of them should be more or less, and this is a time-consuming task.
Water savings
The formulation of this adhesive is self-curing and does not need water for curing; Therefore, water consumption will be saved. When the consumption of water is less, your costs will certainly decrease, and with the reduction of water costs, the total cost of the project materials will be lower.
Cleanliness
Conventional mortars should be processed and used on site. Making mortar will definitely be associated with dirtying the surrounding environment, and some mortar is always spilled on the floor and around the ground. Since Heblex mortar is pre-made and ready and needs only a little water for use, there is no more pollution of the environment.
Decrease in work time
Another one of the most important advantages of Hablex glue, which is very important, especially for project managers, is the reduction of work time. Since this glue is pre-made and does not need to be processed, the work speed increases significantly. If we want to be in a position of comparison, if a wall with ordinary sand and cement mortar takes 7 days to build, using this glue, only 24 hours are needed to build it.
Availability during the year
Hablex glue is available in dry form throughout the year and can be purchased whenever you need it. But this is not the case with ordinary mortar and its materials may not be available at times of the year. Although wet sand may be found, it needs to be dried and used, which will be costly.
Less waste
20 to 30% of cement mortar is made up of waste, which causes a part of cement mortar to be wasted. This is despite the fact that Hablex glue does not contain any kind of waste, or if it does, it is so small that nothing is wasted from the mortar.
Thermal insulation
As mentioned at the beginning of this article, Hablex glue is heat resistant. This mortar is specially made for Hablex blocks and since the Hablex block itself is heat insulated, it needs a heat insulating mortar. Ordinary mortar has no resistance to heat.
Quality control
Another important advantage of Hablex mortar is that its quality is controlled in the factory. Heblex mortar is prepared in the factory, and it is possible to check the quality of the materials and test them well, and finally a high-quality product comes out. Cement mortar is prepared on site and it is not possible to check the quality of the material on site.
Conclusion
Heblex glue or Heblex mortar is used to connect Heblex blocks and panels. This glue is prepared based on a special formulation suitable for AAC blocks in the factory. Since these blocks are prepared in advance and in the factory, as well as due to the materials used in them, they have advantages and advantages over ordinary cement sand mortars that have expanded their use. In this article, we have fully described the advantages of Hablex glue.
