What is a deer horn protection?
In fact, deer antler protection can be defined as a combination of sharp and sharp metal parts that are connected by welding metals. This type of protection is designed to achieve maximum safety and strength, which has special effects with high safety. Deer antler protection and its types are the safest type of protection on the wall. You are looking for protection for your home or business that will probably last as long as your building. Protection that deals with the safety of your life and property and that of your family. The deer antler guard is one of the new generation guards and it is not very old in this way. The design of this guard is inspired by deer antlers and is mostly used for houses and buildings that have open spaces such as courtyards, balconies or villa backyards.
The benefits of using deer horn shield
It has a very high strength against weather conditions.
The cost of maintenance and reconstruction is very low compared to other protections.
It is impossible to pass over the deer antler guard.
The density of spears in deer antler guards can be changed.
The price of these protectors is calculated per meter. Due to the large number of intertwined antlers and the sharp point, it is impossible to pass through the deer antler protectors.
The bends facing outward and in different directions of the deer antler guard prevent standing next to them.
The high density of existing spears, despite their strength, shows the high security of the horn protection.
Gauge
The height of this type of protection is 50 to 150 cm.
For welding and installation of deer antler fence protection, protection prongs are used by double-sided welding method and a special electrode for this type of protection.
The cross-section of the guard arrows is 2 to 4 cm. It is necessary to use 10-gauge rebar for construction.
The guard of the deer horn fence is such that even if the thieves are professional, but with reference to the sharp point and the strength of the rebar used in the construction of this guard, the possibility of bypassing the guard is not possible in any way.
< /p>
Construct
This type of protection is suitable for theft and now for the security of all entertainment centers, administrative and commercial centers from protections such as electric fences, electronic locks, CCTV cameras (imperceptible and visible protection) types of building protections that have tips They are sharp and winning. It is used as lily guard, spearhead guard, bush guard, deer horn guard, etc.
Horn
The welding of this shield is done in two ways: 1) electrode welding 2) welding under CO2 gas
Electrode welding
The old method of welding with a fragile and weak connection that breaks after a while due to impact or decay. In this method, by connecting the electrode to the welding place, a bond is created and an appendage is formed on it, which is called welding mud. This welding mud should be removed by a welder or by milling, but this work is practically impossible in the construction of deer antler protection due to the high number of welding points (more than 230 connections per meter)! For this reason, this appendage itself is one of the major defects of electrode welding, which causes decay and loosening of the connection point over time.
On the other hand, after painting, as a result of impact during loading and unloading or installation of guards, this mud is welded and causes the color to disappear at that point, which also damages the beauty of the work and after a while also causes corrosion of the metal and It will be rusted. Also, if the welder does not have enough skills and does not use the right force when connecting the electrode, it will cause a weak connection that will break easily.
Welding under CO2
In co2 welding, the defect has been removed and every time the connection is made for welding, co2 gas prevents air from entering the welding point, and as a result, we will have a complete connection and a stronger weld than the electrode. This connection is so strong that even co2 welding can be used to connect cast iron alloy to metal. While this is not possible with electrode welding.
