Operational repair and maintenance is very important to reach the maximum power of the cooling tower and increase its life. By choosing a suitable company for the purchase and installation of the cooling tower, the operating and maintenance costs can be reduced. Asa Air Conditioning Company provides maintenance instructions and repair and service information to the customer. These methods can prevent the loss of efficiency in the heat transfer part by maintaining the proper flow of water and air, as well as preventing corrosion in the cooling tower. It depends on the geographical location of the building.
Some of the actions that can be done without the need for an expert to maintain the cooling tower:
Installing a strainer to filter the additions and debris that prevents the system from being damaged by airborne or waterborne pollutants.
Nozzles should be cleaned regularly to prevent clogging. Because nozzles improve water distribution, they should be located where they can be easily accessed for inspection, cleaning, or replacement.
Various water purification methods such as filtration, descaling and the use of green chemicals ensure the optimal performance of the cooling tower system. It is recommended that this be done monthly, unless otherwise stated by the manufacturer.
Thorough cleaning of cooling towers means using a cleaning chemical that circulates through the cooling tower and air conditioning system. .
High pressure washing and using a vacuum cleaner is also part of the complete cleaning process. If necessary, mechanical components such as fans, motors and belts should also be cleaned and adjusted. Electrical components such as capacitors and wiring should be checked and replaced if necessary.
Cooling Tower and Energy Productivity
With rising energy prices and an emphasis on environmental sustainability, it is important to ensure that cooling towers are designed and built, as well as installed and maintained, to use less energy. Some of the methods that can be used to improve efficiency include the following:
Using open circuit cooling towers that consume less energy than other types of cooling towers.
Fan speed control: The fan speed of the cooling tower must have the ability to be controlled according to the temperature of the output fluid or the temperature and pressure of cooling. This is achieved by using two speed motors or variable speed drive technology. This system can be added to old and new cooling towers.
