Frozen fridge freezer
One of the common refrigerator freezer failures that many users face is frost. This problem not only creates an unpleasant appearance, but also has a negative effect on the quality and taste of food. Mold can increase the temperature inside the freezer and thus damage the food. One of the main reasons for frostbite is moisture entering the cold air inside the refrigerator; As this moisture cools, it quickly turns into ice and forms frost. But other factors such as the failure of the rubber around the door, incorrect temperature settings, or frequent opening and closing of the door can also cause mildew.
Failure to refrigerate freezer
One of the common failures of the refrigerator-freezer that most users encounter is that the refrigerator-freezer is not cold. One of the important factors in the occurrence of this problem is the incorrect setting of the refrigerator temperature. In different seasons, temperature settings should be changed. For example, it is better to set the temperature of the refrigerator between 3 and 4 degrees Celsius in winter and between 1 and 2 degrees Celsius in summer. Failure to pay attention to this issue can lead to an increase in the internal temperature of the refrigerator and cause food spoilage.
Another reason for the refrigerator not cooling is putting too much food in the refrigerator. When the refrigerator is overfilled, the compressor works longer to produce the required cold, and as a result, more pressure is applied to it. Over time, this situation reduces the efficiency of the compressor and lowers the cooling power of the device. In addition, some food items may block the cold air vents inside the refrigerator and prevent proper air circulation, which will also lead to a decrease in the refrigerator's coldness.
The smell of fridge freezer water cooler
The unpleasant smell of the water cooler is very annoying, this smell has been present in refrigerators and water coolers since the past until today. This problem is more annoying in the summer season, because water consumption is very high in the summer season. One of the reasons for the unpleasant smell of the water cooler is that the water has been left in the water cooler for a long time, and the use of low-quality filters also causes This becomes a problem. You should clean the refrigerator regularly so that the water cooler does not smell bad, this problem can be solved with simple solutions. To get more information about the bad smell of the water cooler in the refrigerator and how to fix it, the article on how to fix the bad smell of the water cooler Study the refrigerator.
What is the reason for not closing the refrigerator door?
Among the other common failures of the fridge freezer is the refrigerator door not closing, the rubber around the refrigerator door is installed, which causes the refrigerator door to be completely closed, and prevents the cold air from coming out of the cabin. The rubber around the refrigerator door loses its efficiency if it is rotten and torn, in this situation, the temperature balance of the refrigerator will be disturbed and its performance will decrease. If the rubber is damaged, you must replace it, this causes problems in opening and closing the refrigerator door. Another reason for the refrigerator door not closing is that it is not level.
What are the causes of overheating the engine?
Another common failure of the refrigerator freezer is overheating of the motor. The presence of contaminated materials in the dryer filter causes the motor to overheat. When the filter collects a large amount of dirt and pollution, the pressure on the compressor enters a lot, finally the refrigerator motor gets hot. Other reasons can be mentioned the blockage of capillary tube, in this case, the gas pressure transmission by the compressor is not done properly and the refrigerator motor gets hot. Another reason for getting hot. motor, the condenser is dirty and the fan is broken, the deposits in the coils act as insulation; In this case, they will prevent the absorption of internal heat and the exit of heat to the outside. Failure of the condenser fan causes the engine to overheat, because the desired air flow does not occur between the condenser tubes.