Swings and keys
Sockets and switches are among the construction equipments that have a direct role in relation to electricity consumption. To choose keys and sockets, you should pay attention to the type of use, number, location and safety standards. For example, if you need an outlet for the bathroom or kitchen, you should use outlets with an earth pole that will not spark if they touch water or moisture and reduce the risk of electric shock. You should also make sure that the socket and switch are the same and compatible with each other. Otherwise, it is possible that excessive currents may be released and electrical devices may be damaged, and this is a misuse of the building's wiring equipment.
Fuses and panels
Fuses and switchboards are among the building's electrical equipment that have a protective and control role. To choose fuses and switchboards, you should pay attention to current capacity, type of protection, number of lines and safety standards. For example, for fuses, you should use fuses that have the ability to break quickly so that if the current increases beyond the permissible limit, they will cut off the line and prevent damage to the system. Make sure that the electrical panel is in a suitable and accessible place and has a seal and lock so that it is not tampered with.
Electricity conversion
In the electrical wiring of old buildings and houses, the market method is used to install the conversion switch. This method is quite simple and you only need to connect the phase wire to the base of the lamp after passing through two conversion switches and connect the neutral wire to the base from the other screw.
Tube Tube
One of the types of electric pipes are hose pipes, which are known as hose pipes because of their hose-shaped appearance. These pipes are made of high-quality insulating materials and show great strength against external factors, so they can protect cables and electric wires well. Electric wires are conductors and they pass electric current, so they should be covered in suitable covers so that they are not damaged and do not cause damage. Electric hose pipes are the most widely used type of pipe for electrical piping, and there are no restrictions on their use, and you can use them in all construction projects.
Multipurpose
Electric protector and multi-way are among practical electrical appliances and are very important in the electrical industry. But there are differences between the power protector and multi-way. Electric protector is a type of protective device that is used to control the amount of incoming current and protect electrical appliances and protects electrical appliances in important situations such as power fluctuations. But multi-way is also a type of electrical device that is used to connect several devices to one outlet. If you intend to use several electrical devices at the same time, but only one socket is available to you, easily use the current in the circuit for several types of electrical devices with the help of a multiway.
Lamp
The lamp head or lamp base is part of the lighting device where the lamp is installed. Head screws usually have a base for installing lamps and are used to connect electrical connections to electricity. To put it more simply, the lamp head is an intermediary between the electric wires and the lamp.